Insignia NS-39E480A13 User Manual (English) - Page 16

NS-39E480A13/NS-42E480A13/NS-46E481A13 Insignia 39"/42"/46" 1080p LED TV Using composite video (good) Note The back of your TV may vary from the illustration based on the model of your TV. To connect a cable or satellite box using composite video: 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an AV cable (not provided) to the AV IN VIDEO jack and AV IN L /R audio jacks on the side of your TV and to the composite video and audio out jacks on the cable or satellite box. Note When you connect the audio using the AV IN L/R audio jacks, the audio output is analog. Using coaxial (good) Note The back of your TV may vary from the illustration based on the model of your TV. To connect a cable or satellite box using coaxial: 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a coaxial cable (not provided) to the ANT/CABLE jack on the side of your TV and to the coaxial out jack on the cable or satellite box. Cables are often color-coded to match color-coded jacks. Cable or satellite box Cable or satellite box AV cable Side of TV 4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Go through the Setup Wizard on page 21. Side of TV Coaxial cable 4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Go through the Setup Wizard on page 21. Notes • • Use a coaxial cable to eliminate interference and noise from radio waves. Do not bundle the coaxial cable with the power cord or other cables. 12 www.insigniaproducts.com