Insignia NS-FWM45W3 User Guide

Insignia NS-FWM45W3 Manual

Insignia NS-FWM45W3 manual content summary:

  • Insignia NS-FWM45W3 | User Guide - Page 1
    USER GUIDE 4.5 Cu. Ft. High Efficiency Front-Load Washer NS-FWM45W3 Before using your new product, please read these instructions to prevent any damage.
  • Insignia NS-FWM45W3 | User Guide - Page 2
    Contents IMPORTANT SAFETY INSTRUCTIONS 3 Features 6 Package contents 6 Main components 7 Control panel 8 Unpacking your washer 10 Choosing a location 11 Washer dimensions and installation measurements 12 Electrical requirements 14 Water requirements
  • Insignia NS-FWM45W3 | User Guide - Page 3
    FWM45W3 Cleaning the door gasket 38 Storing your washer 38 Troubleshooting 39 Understanding error codes 39 Specifications 46 ONE-YEAR LIMITED WARRANTY 47 IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS This User Guide contains important information on the installation, use, and care of
  • Insignia NS-FWM45W3 | User Guide - Page 4
    Close supervision of children is necessary when the appliance is used near children. Before your washer is removed from service or discarded, remove the door or lid. Failure to follow these instructions may result in death or injury to persons. 6 Do not reach into the appliance if the tub is moving
  • Insignia NS-FWM45W3 | User Guide - Page 5
    the washing machine from the power supply before attempting any service. Disconnect the power cord by grasping the plug, not not be trapped in the machine. • Do not use excessive detergents. SAVE THESE INSTRUCTIONS Installation warnings and precautions 1 Plug the power cord into an AC 120 V/60 Hz
  • Insignia NS-FWM45W3 | User Guide - Page 6
    and solid floor that can support its weight. Failure to do so may result in abnormal vibrations, noise, or problems with the product. 8 damage. 10 Failure to closely follow these instructions may result in an abnormal vibrating and out guide (1) Nylon tie (1) User Guide 6 www.insigniaproducts.com
  • Insignia NS-FWM45W3 | User Guide - Page 7
    SAFETY & PRECAUTIONS You'll also need (not provided): NS-FWM45W3 Main components Front Detergent dispenser drawer Door Water hose (2) Control panel Back Filter door Water supply inlets Drain hose www.insigniaproducts.com 7
  • Insignia NS-FWM45W3 | User Guide - Page 8
    the end of the cycle, the display shows the time when the cycle will end. • The display shows an error code if your washer experiences a problem. Extra Rinse 6 button Press to add an extra rinse to the selected cycle. 8 www.insigniaproducts.com
  • Insignia NS-FWM45W3 | User Guide - Page 9
    SAFETY & PRECAUTIONS NS-FWM45W3 # ITEM DESCRIPTION Press to add a pre-soak to the selected cycle. This option begins with a brief tumble and then proceeds to 7 Pre Soak button soak the clothes with water and detergent for a specified period of time. Once complete, the cycle will begin
  • Insignia NS-FWM45W3 | User Guide - Page 10
    of the base packaging, including the cardboard, Styrofoam base, and Styrofoam tub support (inserted in the center of the base). Note: If you are installing your washer on a pedestal, proceed to the installation instructions that came with the pedestal. 4 Carefully return your washer to an upright
  • Insignia NS-FWM45W3 | User Guide - Page 11
    C) for proper washer operation. • Never install on a platform or weakly supported structure. • Don't install your washer in an area where it will come washer must be properly installed and located in accordance with the installation instructions before it is used. Make sure that the cold water hose
  • Insignia NS-FWM45W3 | User Guide - Page 12
    INSTALLATION INSTRUCTIONS Washer dimensions and installation measurements 27 in. (68.6 cm) 39 13/16 in. (101.09 cm) 34 1/4 in. (86.9 cm) 39 13/16 in. (101.09 cm) Note: Height with pedestal = 52 5/8 in. (133.6 cm). Height stacked = 84 in. (213.36 cm) 12 www.insigniaproducts.com
  • Insignia NS-FWM45W3 | User Guide - Page 13
    INSTALLATION INSTRUCTIONS Installing under a counter 0 in. (0 cm) 39 13/16 in. (101.09 cm) NS-FWM45W3 0 in. (0 cm) 27 in. (68.6 cm) 0 in. (0 cm) Installing in an
  • Insignia NS-FWM45W3 | User Guide - Page 14
    time-delay fuse. • Connect to an individual branch circuit. • Do not remove the ground prong. • Do not use an adapter. Failure to follow these instructions can result in electrical shock, fire, or death. Electrical grounding is required for your washer. • You must ground your washer. In the event of
  • Insignia NS-FWM45W3 | User Guide - Page 15
    INSTALLATION INSTRUCTIONS NS-FWM45W3 • Your washer is equipped with a power cord internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. When servicing, do not contact the following parts while the appliance is energized: electrical valve, drain
  • Insignia NS-FWM45W3 | User Guide - Page 16
    INSTALLATION INSTRUCTIONS Drainage requirements • The drain must be capable of eliminating 16.98 gallons (64.3 l) per minute. • The standpipe must be: • Minimum diameter: 1 1/4 in. (3.18 cm) • Minimum
  • Insignia NS-FWM45W3 | User Guide - Page 17
    washer Note: The illustrations in this section may not accurately show your actual washing machine, but are only intended to convey a general instruction or concept. Tools you need Channel-lock pliers Carpenter's level Adjustable wrench or 1/2" Adjustable wrench or (12.7 mm) socket with ratchet
  • Insignia NS-FWM45W3 | User Guide - Page 18
    INSTALLATION INSTRUCTIONS 3 Connect the inlet hose ends to the hot and cold water faucets tightly by hand, then tighten another 2/3 turn with pliers or a wrench. Water supply
  • Insignia NS-FWM45W3 | User Guide - Page 19
    INSTALLATION INSTRUCTIONS NS-FWM45W3 Step 3: Connecting the drain hose CAUTION: The wall standpipe drain requires a minimum diameter standpipe of 1 1/4 in. (3.18 cm). 1 Attach the drain hose guide to the end of the drain pipe. 2 Place the drain hose into the wall standpipe (no more than seven
  • Insignia NS-FWM45W3 | User Guide - Page 20
    INSTALLATION INSTRUCTIONS 2 Place the drain hose into the floor standpipe. You can use a nylon tie (included) to attach the drain hose to the standpipe. 47 1/4 in. (120 cm) max. 24 in. (61 cm) min. Floor standpipe 20 www.insigniaproducts.com
  • Insignia NS-FWM45W3 | User Guide - Page 21
    INSTALLATION INSTRUCTIONS NS-FWM45W3 In a laundry tub Notes: • The laundry tub needs a minimum capacity of 20 gal. (76 L). • The top of the laundry tub must be between 2
  • Insignia NS-FWM45W3 | User Guide - Page 22
    INSTALLATION INSTRUCTIONS In a floor drain system Notes: • A floor drain system requires a siphon break (not included). The siphon break must be a minimum of 24 in. (61 cm) from
  • Insignia NS-FWM45W3 | User Guide - Page 23
    INSTALLATION INSTRUCTIONS NS-FWM45W3 Step 4: Leveling your washer CAUTIONS: If your washer isn't level, it may: • Vibrate excessively which can cause your washer to malfunction • Make excessive
  • Insignia NS-FWM45W3 | User Guide - Page 24
    INSTALLATION INSTRUCTIONS Step 5: Powering your washer WARNINGS: • Make sure that the voltage turned on. • Your washer is level and all four leveling legs are firmly in the floor. • The shipping support hardware is removed and saved. • The drain hose is properly tied up. Run a test cycle to make sure
  • Insignia NS-FWM45W3 | User Guide - Page 25
    gently apply a small amount of detergent to the stains, then gently scrub the stains with a brush. • Check the manufacturer's label for special washing instructions. • Make sure that you remove all items from pockets. Hard items, like coins, can damage your washer. • Consider using a pillow case you
  • Insignia NS-FWM45W3 | User Guide - Page 26
    /Pause button to start the cycle. WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS on page 3 before operating your washer. Step 1: Selecting a detergent Your washer is designed to use high efficiency (HE) detergents. • For the best
  • Insignia NS-FWM45W3 | User Guide - Page 27
    powder detergent - Remove the detergent selection insert and place it in a safe location outside of your washer. Follow the detergent manufacturer's instructions when measuring the amount of powder to use. • For liquid detergent - Locate the concentration of your detergent on the bottle. Place the
  • Insignia NS-FWM45W3 | User Guide - Page 28
    OPERATING INSTRUCTIONS Liquid bleach compartment Detergent compartment Fabric softener compartment Main-wash detergent Softener detergent Pre-wash detergent 1 Pour the recommended amount of laundry detergent directly into
  • Insignia NS-FWM45W3 | User Guide - Page 29
    OPERATING INSTRUCTIONS NS-FWM45W3 Step 7: Starting your washer 1 Press the Start/Pause button. Notes: • If you haven't set a delayed end time or if the delay time has
  • Insignia NS-FWM45W3 | User Guide - Page 30
    OPERATING INSTRUCTIONS Washer options and settings Wash cycles and settings CYCLE DETAILS Normal* For lightly to heavily soiled colorfast cottons, household linens, work, and play clothes. Bulky*
  • Insignia NS-FWM45W3 | User Guide - Page 31
    OPERATING INSTRUCTIONS NS-FWM45W3 Soil level LEVEL DETAILS Extra Light Light Medium Heavy Extra Heavy For very lightly soiled clothes. Reduces the washing time. For lightly soiled
  • Insignia NS-FWM45W3 | User Guide - Page 32
    OPERATING INSTRUCTIONS Washer cycles and settings chart • • = Default setting • O = Available • X = Not available Cycle Default Temp cycle time Tap cold Cold Warm Hot Normal 0:50 O O • O Bulky 1:14 O O • O Heavy
  • Insignia NS-FWM45W3 | User Guide - Page 33
    OPERATING INSTRUCTIONS NS-FWM45W3 Cycle No spin Sanitize O Towels O Quick wash O Active wear O Self clean X Rinse & spin O Delicates O Perm Press O Spin Speed Low Medium High O O • O O • O O O O O O X X X O O • O • O • O X Extra high O O • • X O X X
  • Insignia NS-FWM45W3 | User Guide - Page 34
    OPERATING INSTRUCTIONS Cycle Normal Functions Steam Water Plus Child Lock Delay My End Cycle Pre Soak Extra Rinse O X O O O O O Bulky O O O O O O O Heavy Duty O O O O O O O Whites O O O O O O O Sanitize O O O O O O O Towels O O O O O O O Quick
  • Insignia NS-FWM45W3 | User Guide - Page 35
    USER MAINTENANCE INSTRUCTIONS NS-FWM45W3 Maintaining your washer WARNINGS: • Don't use solvents to internal parts are intentionally not grounded and may present a risk of electric shock during servicing. Do not contact the following parts while the appliance is energized: electrical valve, drain
  • Insignia NS-FWM45W3 | User Guide - Page 36
    USER MAINTENANCE INSTRUCTIONS Cleaning the dispenser drawer Detergent and fabric softener may build up in the dispenser drawer, so you should remove the residue and clean the drawer
  • Insignia NS-FWM45W3 | User Guide - Page 37
    USER MAINTENANCE INSTRUCTIONS NS-FWM45W3 3 Using a coin or flat screwdriver in the notch at the top of the door, pry the access door open. 4 Pull down the pour
  • Insignia NS-FWM45W3 | User Guide - Page 38
    USER MAINTENANCE INSTRUCTIONS Cleaning the door gasket 1 Open the washer door. 2 Using both hands, press down the door gasket. 3 While holding down the gasket, inspect it and remove
  • Insignia NS-FWM45W3 | User Guide - Page 39
    INSTRUCTIONS NS-FWM45W3 Troubleshooting CAUTION: Don't try to repair your washer yourself. Doing so invalidates the warranty. Understanding error codes Your washer has an automatic error-monitoring system to detect and diagnose problems , contact qualified service personnel. PROBLEM My washer is
  • Insignia NS-FWM45W3 | User Guide - Page 40
    USER MAINTENANCE INSTRUCTIONS PROBLEM My washer is leaking water. POSSIBLE CAUSE SOLUTION The door gasket is damaged. • Make sure that the gasket is seated and not torn. Objects left
  • Insignia NS-FWM45W3 | User Guide - Page 41
    USER MAINTENANCE INSTRUCTIONS NS-FWM45W3 PROBLEM POSSIBLE CAUSE SOLUTION The load is out of balance. • Redistribute the clothes and run Rinse & Spin. • Increase the load size if you are washing a small
  • Insignia NS-FWM45W3 | User Guide - Page 42
    USER MAINTENANCE INSTRUCTIONS PROBLEM POSSIBLE CAUSE SOLUTION The cabinet is moving. • Your washer is leveling legs so they are all firmly touching the floor and locked in place. • Open the door and manually redistribute the load. To check your washer, run Rinse & Spin with no load. If it runs
  • Insignia NS-FWM45W3 | User Guide - Page 43
    USER MAINTENANCE INSTRUCTIONS NS-FWM45W3 PROBLEM POSSIBLE CAUSE SOLUTION The wash tub This is normal. does not fill with water. • Front load washers do not require the tub to fill with
  • Insignia NS-FWM45W3 | User Guide - Page 44
    USER MAINTENANCE INSTRUCTIONS PROBLEM My clothes are wrinkling. My clothes are grayed or yellowed. My may be indicated. Incorrect use of fabric softener. • Check the fabric softener package for instructions and follow the directions for using the dispenser. Dye transfer • Sort whites or lightly
  • Insignia NS-FWM45W3 | User Guide - Page 45
    USER MAINTENANCE INSTRUCTIONS NS-FWM45W3 PROBLEM POSSIBLE CAUSE SOLUTION Your washer has not been used for a long time. There's a smell inside my washer. • Run the Self Clean cycle once a month. • If
  • Insignia NS-FWM45W3 | User Guide - Page 46
    Specifications Dimension (H × W × D) Weight Washing Capacity Power Supply Rated Current Standard Water Pressure Power cord length Drain hose length Noise level 39 13/16 x 27 x 34 1/4 in. (101.09 x 68.6 x 86.9 cm) Gross: 231 lbs. (104.8 kg) Net: 216 lbs. (98 kg) 4.5 cu. ft. or 18 lbs. (8.16 kg) 120V
  • Insignia NS-FWM45W3 | User Guide - Page 47
    become the property of Insignia and are not returned to you. If service of Products or parts are required after the Warranty Period expires, cover: • Food, beverage, and/or medicine loss/spoilage. • Customer instruction/education • Installation • Set up adjustments • Cosmetic damage • Damage due to
  • Insignia NS-FWM45W3 | User Guide - Page 48
    operation or maintenance • Connection to an incorrect voltage or power supply • Attempted repair by any person not authorized by Insignia to service the Product • Products sold "as is" or "with all faults" • Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.) • Products
  • Insignia NS-FWM45W3 | User Guide - Page 49
    www.insigniaproducts.com 1-877-467-4289 (U.S. and Canada) INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2023 Best Buy. All rights reserved. V5 ENGLISH 23-0073
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49

Before using your new product, please read these instructions to prevent any damage.
USER GUIDE
4.5 Cu. Ft. High Efficiency
Front-Load Washer
NS-FWM45W3