Insignia NS-FWM45W3 User Guide - Page 14
Electrical requirements, Either side, Front, Electrical grounding is required for your washer.
View all Insignia NS-FWM45W3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
INSTALLATION INSTRUCTIONS Minimum clearances between your washer and adjacent walls or other surfaces are: • Either side: 0 in. (0 cm) • Rear: 3 in. (7.6 cm) • Front: 2 in. (5.1 cm) • Top: 0 in. (0 cm) 0 in. (0 cm) 0 in. (0 cm) 27 in. (68.6 cm) 0 in. (0 cm) 34 1/4 in. (86.9 cm) 2 in. (5.1 cm) 3 in. (7.6 cm) Electrical requirements WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS on page 3 before operating your washer. WARNINGS: • Connect to a grounded three-prong outlet with an individual 16 amp, single-phase branch circuit protected by a 16 amp circuit breaker or time-delay fuse. • Connect to an individual branch circuit. • Do not remove the ground prong. • Do not use an adapter. Failure to follow these instructions can result in electrical shock, fire, or death. Electrical grounding is required for your washer. • You must ground your washer. In the event of a malfunction or breakdown, grounding reduces the risk of electric shock by providing a path of least resistance for the electric current. • A 120V, 60Hz, AC-only, single-phase, 16 amp, time-delay fuse or circuit breaker electrical supply is required. We recommend that you use a time-delay fuse or provide a circuit serving only your washer. 14 www.insigniaproducts.com