Insignia NS-FWM45W3 User Guide - Page 18
washer. The water supply hose connected to the hot water faucet must
 |
View all Insignia NS-FWM45W3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
INSTALLATION INSTRUCTIONS 3 Connect the inlet hose ends to the hot and cold water faucets tightly by hand, then tighten another 2/3 turn with pliers or a wrench. Water supply hose 4 Place the unconnected end of the hoses into a bucket, then turn on the faucets connected to the water supply hoses for 10 or 15 seconds to remove any foreign substances. Turn off the faucets. Water supply hose 5 Connect the water hoses to the water intake connections on the back of your washer. The water supply hose connected to the hot water faucet must be connected to the hot water (H) supply intake, and the supply hose connected to the cold faucet must be connected to the cold (C) water supply intake. Turn the water on and check for leaks. 18 www.insigniaproducts.com
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20 -
21 -
22 -
23 -
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
 |
 |
