Insignia NS-FWM45W3 User Guide - Page 45
Make sure that the hot water inlet, not be working.
View all Insignia NS-FWM45W3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
USER MAINTENANCE INSTRUCTIONS NS-FWM45W3 PROBLEM POSSIBLE CAUSE SOLUTION Your washer has not been used for a long time. There's a smell inside my washer. • Run the Self Clean cycle once a month. • If the smell is strong or persists, you may need to run the Self Clean cycle more than once a month. • Always remove wet items from your washer promptly after the machine stops running. • Leave the door slightly open for the washer to dry out. You are not using the recommended quality of HE detergent. • Use only HE detergent. You used too much detergent. • Use only the amount of detergent recommended on the detergent container. Incorrect placement of the My washer is detergent insert inside the leaking detergent. dispenser drawer. • Make sure that the detergent insert is properly located and fully seated. Never put detergent above the max line. My washer is improperly dispensing softener or bleach. The detergent dispenser is clogged. Softener or bleach is filled above the max line. Softener or bleach cup issue in the dispenser drawer. • Clean the dispenser drawer monthly to remove any buildup of chemicals. • Make sure to use only the correct amount of softener or bleach. • Make sure that the softener and bleach cup in the dispenser drawer are seated or they will not work. The water isn't hot. Your hot water heater may not be working. • Make sure that the hot water inlet faucet is turned on. • Check the status of your hot water heater. You may be out of hot water. Note: You can still wash clothes in cold water only. Your washer may have a The display panel malfunction. does not light. • Make sure that the power cord is connected to a working outlet. • Contact a qualified repair professional to check the display panel wiring. The load has too many suds. You may be using the wrong detergent or the wrong amount of detergent. • Use a high-efficiency detergent to reduce over-sudsing. See Step 1: Selecting a detergent on page 26. • If you have "soft" water, reduce the amount of detergent. • For small or lightly soiled loads, reduce the amount of detergent. www.insigniaproducts.com 45