Intel D845HV Product Guide - Page 12
Intel® 845 Chipset, Intel® 82845 Memory Controller Hub (MCH), Intel, Memory Controller Hub MCH - motherboard
View all Intel D845HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Intel Desktop Boards D845HV and D845WN Product Guide • 64 Mbit, 128 Mbit, and 256 Mbit technologies for the following memory configurations: 32 MB to 384 MB (64 Mbit technology) Up to 768 MB (128 Mbit technology) Up to 1.5 GB (256 Mbit technology) ✏ NOTE The D845HV and D845WN desktop boards have been designed to support DIMMs based on 512 Mbit technology up to 3 GB, but this technology has not been validated on these boards. For more information about the latest list of tested memory, refer to the Intel World Wide Web site at: http://support.intel.com/support/motherboards/desktop/ • Unbuffered and non-registered single or double-sided DIMMs • Serial Presence Detect (SPD) memory • Non-ECC and ECC DIMMs • 3.3 V memory only ✏ NOTE For information about vendors that support these memory requirements, refer to the D845HV or D845WN link on this Intel World Wide Web site: http://support.intel.com/support/motherboards/desktop/ For information about installing memory, see Chapter 2 starting on page 21. Intel® 845 Chipset The Intel 845 chipset consists of the following devices: • Intel 82845 Memory Controller Hub (MCH) with AHA bus • Intel 82801BA I/O Controller Hub (ICH2) with AHA bus • Firmware Hub (FWH) Intel® 82845 Memory Controller Hub (MCH) The MCH provides the processor, system memory, AGP, and hub interfaces in the Intel 845 chipset platform. Features on D845HV and D845WN boards includes: • Single processor support with 400 MHz data transfer rate • Support for up to 1.5 GB (with 256 Mbit technology) SDR-SDRAM at 133 MHz operation • 1.5 V AGP interface with 4X Side Band Addressing (SBA)/data transfer and 2X and 4X fast write 12