Intel D845HV Product Guide - Page 31

Removing DIMMs, the socket.

Get Intel D845HV PDF manuals and user guides View all Intel D845HV manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Installing and Replacing Desktop Board Components Removing DIMMs To remove a memory module, follow these steps: 1. Observe the precautions in "Before You Begin" on page 21. 2. Turn off all peripheral devices connected to the computer. Turn off the computer. 3. Remove the ac power cord from the computer. 4. Remove the computer's cover. 5. Remove the AGP card (if it interferes with the DIMM clips from being easily opened and closed). 6. Gently spread the retaining clips at each end of the DIMM socket. The DIMM pops out of the socket. 7. Hold the DIMM by the edges, lift it away from the socket, and store it in an anti-static package. 8. Reinstall the AGP card (if you removed it before installing the DIMMs). 9. Reinstall and reconnect any parts you removed or disconnected to reach the DIMM sockets. 10. Replace the computer's cover and reconnect the ac power cord. 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
Installing and Replacing Desktop Board Components
31
Removing DIMMs
To remove a memory module, follow these steps:
1.
Observe the precautions in "Before You Begin" on page 21.
2.
Turn off all peripheral devices connected to the computer.
Turn off the computer.
3.
Remove the ac power cord from the computer.
4.
Remove the computer’s cover.
5.
Remove the AGP card (if it interferes with the DIMM clips from being easily opened
and closed).
6.
Gently spread the retaining clips at each end of the DIMM socket.
The DIMM pops out of
the socket.
7.
Hold the DIMM by the edges, lift it away from the socket, and store it in an
anti-static package.
8.
Reinstall the AGP card (if you removed it before installing the DIMMs).
9.
Reinstall and reconnect any parts you removed or disconnected to reach the DIMM sockets.
10. Replace the computer’s cover and reconnect the ac power cord.