Intel D845HV Product Guide - Page 27

Installing a Processor, Installing the Processor Fan Heatsink - processor support

Get Intel D845HV PDF manuals and user guides View all Intel D845HV manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

Installing and Replacing Desktop Board Components Installing a Processor CAUTION Before installing or removing the processor, make sure that ac power has been removed by unplugging the power cord from the computer; the standby power LED should not be lit (see Figure 3 on page 18). Failure to do so could damage the processor and the board. To install a processor, follow these instructions: 1. Observe the precautions in "Before You Begin" on page 21. 2. Locate the processor socket and raise the socket lever completely. 3. Install the processor so that the corner with the triangle marking (A) is aligned with the corner where the lever is attached to the socket (see Figure 9). 4. Lower the lever to its original position. mPGA478B mPGA478B mPGA478B A Figure 9. Installing a Processor OM12078 Installing the Processor Fan Heatsink For instructions on how to install the processor fan heatsink, refer to the boxed processor manual or the Intel World Wide Web site at: http://support.intel.com/support/motherboards/desktop 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
Installing and Replacing Desktop Board Components
27
Installing a Processor
CAUTION
Before installing or removing the processor, make sure that ac power has been removed by
unplugging the power cord from the computer; the standby power LED should not be lit (see
Figure 3 on page 18).
Failure to do so could damage the processor and the board.
To install a processor, follow these instructions:
1.
Observe the precautions in “Before You Begin” on page 21.
2.
Locate the processor socket and raise the socket lever completely.
3.
Install the processor so that the corner with the triangle marking (A) is aligned with the corner
where the lever is attached to the socket (see Figure 9).
4.
Lower the lever to its original position.
OM12078
mPGA478B
mPGA478B
mPGA478B
A
Figure 9.
Installing a Processor
Installing the Processor Fan Heatsink
For instructions on how to install the processor fan heatsink, refer to the boxed processor manual
or the Intel World Wide Web site at: