Intel D845HV Product Guide - Page 41
Remove the computer cover., Locate the battery on the board see
View all Intel D845HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Installing and Replacing Desktop Board Components To replace the battery, follow these steps: 1. Observe the precautions in "Before You Begin" (see page 21). 2. Turn off all peripheral devices connected to the computer. Disconnect the computer's power cord from the ac power source (wall outlet or power adapter). 3. Remove the computer cover. 4. Locate the battery on the board (see Figure 18). 5. With a medium flat-bladed screwdriver, gently pry the battery free from its connector. Note the orientation of the "+" and "-" on the battery. 6. Install the new battery in the connector, orienting the "+" and "-" correctly. 7. Replace the computer cover. OM11987 Figure 18. Removing the Battery 41
Installing and Replacing Desktop Board Components
41
To replace the battery, follow these steps:
1.
Observe the precautions in “Before You Begin” (see page 21).
2.
Turn off all peripheral devices connected to the computer.
Disconnect the computer’s power
cord from the ac power source (wall outlet or power adapter).
3.
Remove the computer cover.
4.
Locate the battery on the board (see Figure 18).
5.
With a medium flat-bladed screwdriver, gently pry the battery free from its connector.
Note
the orientation of the “+” and “-” on the battery.
6.
Install the new battery in the connector, orienting the “+” and “-” correctly.
7.
Replace the computer cover.
OM11987
Figure 18.
Removing the Battery