Intel D865GSA Product Specification - Page 36
Legacy I/O Controller
View all Intel D865GSA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Intel Desktop Board D865GSA Technical Product Specification 1.6 Legacy I/O Controller The Winbond W83627EHG I/O controller provides the following features: • One serial port • One parallel port with Extended Capabilities Port (ECP) and Enhanced Parallel Port (EPP) support • Serial IRQ interface compatible with serialized IRQ support for PCI systems • PS/2-style mouse and keyboard interfaces • Interface for one 1.44 MB or 2.88 MB diskette drive • Intelligent power management, including a programmable wake-up event interface • PCI power management support The BIOS Setup program provides configuration options for the I/O controller. For information about Winbond W83627EHG I/O controller Refer to http://www.winbond.com/e-winbondhtm/index.asp 1.6.1 Serial Port The board has one serial port connector located on the back panel. The serial port supports data transfers at speeds up to 115.2 kbits/sec with BIOS support. For information about The location of the serial port A connector Refer to Figure 10, page 53 1.6.2 Parallel Port The 25-pin D-Sub parallel port connector is located on the back panel. Use the BIOS Setup program to set the parallel port mode. For information about The location of the parallel port connector Refer to Figure 10, page 53 1.6.3 Diskette Drive Controller The I/O controller supports one diskette drive. Use the BIOS Setup program to configure the diskette drive interface. For information about The location of the diskette drive connector on the D865GSA board Refer to Figure 11, page 54 36