Intel D865GSA Product Specification - Page 59
Table 31. States for a One-Color Power LED
View all Intel D865GSA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Technical Reference Hard Drive Activity LED + 1 2 - 3 4 Reset Switch 5 6 7 8 +5 V DC 9 Singlecolored Power LED + - Power Switch N/C Dualcolored Power LED - + OM18308 Figure 12. Connection Diagram for Front Panel Connector 2.7.2.3.1 Hard Drive Activity LED Connector Pins 1 and 3 can be connected to an LED to provide a visual indicator that data is being read from or written to a hard drive. Proper LED function requires one of the following: • A Serial ATA hard drive connected to an onboard Serial ATA connector • A Parallel ATA IDE hard drive connected to an onboard Parallel ATA IDE connector 2.7.2.3.2 Reset Switch Connector Pins 5 and 7 can be connected to a momentary single pole, single throw (SPST) type switch that is normally open. When the switch is closed, the board resets and runs the POST. 2.7.2.3.3 Power/Sleep LED Connector Pins 2 and 4 can be connected to a one- or two-color LED. Table 31 shows the possible states for a one-color LED. Table 32 shows the possible states for a two-color LED. Table 31. States for a One-Color Power LED LED State Description Off Power off/sleeping Steady Green Running 59