Intel D865GSA Product Specification - Page 60
Front Panel USB Connectors, INTEGRATOR'S NOTES
View all Intel D865GSA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Intel Desktop Board D865GSA Technical Product Specification Table 32. States for a Two-Color Power LED LED State Description Off Power off Steady Green Running Steady Yellow Sleeping NOTE The colors listed in Table 31 and Table 32 are suggested colors only. Actual LED colors are product- or customer-specific. 2.7.2.3.4 Power Switch Connector Pins 6 and 8 can be connected to a front panel momentary-contact power switch. The switch must pull the SW_ON# pin to ground for at least 50 ms to signal the power supply to switch on or off. (The time requirement is due to internal debounce circuitry on the board.) At least two seconds must pass before the power supply will recognize another on/off signal. 2.7.2.4 Front Panel USB Connectors Figure 13 is a connection diagram for the front panel USB connectors. # INTEGRATOR'S NOTES • The +5 V DC power on the USB connector is fused. • Pins 1, 3, 5, and 7 comprise one USB port. • Pins 2, 4, 6, and 8 comprise one USB port. • Use only a front panel USB connector that conforms to the USB 2.0 specification for high-speed USB devices. One USB Port Power (+5 V DC) D- D+ Ground Key (no pin) 12 34 56 78 10 Power (+5 V DC) D- D+ Ground No connect One USB Port OM18309 Figure 13. Connection Diagram for Front Panel USB Connectors 60