Intel SBXD62 User Guide - Page 28
Opening the Blade Server Cover
UPC - 735858185448
View all Intel SBXD62 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Opening the Blade Server Cover The following illustration shows how to open the cover on a blade server. Cover Pins Blade-Cover Release Blade-Cover Release AF000436 To open the blade server cover, complete the following steps: 1. Read the safety information beginning on page 65 in Appendix C, "Safety Information" and "Installation Guidelines" on page 15. 2. If the blade server is installed in a Intel® Blade Server Chassis SBCE, remove it (see "Removing the Blade Server from an Intel® Blade Server Chassis SBCE" on page 17 for instructions). 3. Carefully lay the blade server down on a flat, non-conductive surface, with the cover side up. 4. Press the blade-cover release on each side of the blade server and lift the cover open, as shown in the illustration. 5. Lay the cover flat, or lift it from the blade server and store for future use. Caution: Hazardous energy is present when the blade server is connected to the power source. Always replace the blade cover before installing the blade server. 18 Intel® Server Compute Blade SBXD62 Installation and User's Guide