Intel SBXD62 User Guide - Page 55
Table 5. Abbreviated List of POST Error Messages, message, Failing device or problem found
UPC - 735858185448
View all Intel SBXD62 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Table 5. Abbreviated List of POST Error Messages POST message 161 162 163 289 301 303 962 11xx 1162 1800 2400 2462 00019xxx 00180xxx 01295085 012980xx 012981xx 01298200 Failing device or problem found Suggested action The real-time clock battery has failed. Replace the battery yourself or call for service. A device configuration has changed. Make sure that optional devices are installed correctly and turned on. NOTE: If you are unable to start the Configuration/ Setup Utility program, view the system event log in the management module. The time of day has not been set. Set the date and time. A failing DIMM was disabled. Keyboard and keyboard controller Make sure that the installed memory is correct for your blade server type and that it is installed properly. • Make sure that the keyboard/video/mouse select button LED on the front of the blade server is lit, indicating that the blade server is connected to the shared keyboard. • Make sure that the keyboard cable is connected to the Intel® Blade Server Chassis SBCE and nothing is resting on the keyboard keys. Parallel port configuration error Start the Configuration/Setup Utility program and make sure that the parallel-port setting is correct. Serial port error Make sure that the serial cable is connected correctly. Serial port configuration conflict Start the Configuration/Setup Utility program and make sure that the IRQ and I/O port assignments that are needed by the serial port are available. PCI adapter hardware interrupt Video controller and memory Start the Configuration/Setup Utility program and make sure that the interrupt resource settings are correct. • Make sure that the keyboard/video/mouse select button LED on the front of the blade server is lit, indicating that the blade server is connected to the shared monitor. • Make sure that the monitor is connected correctly to the Intel® Blade Server Chassis SBCE. Processor x is not functioning or Make sure that processor x is installed correctly. If the failed the built-in test. problem remains, replace processor x. A PCI adapter requested a resource that is not available. Start the Configuration/Setup Utility program and make sure that the resources that are needed by the PCI adapter are available. The blade server failed the ECC- Have the system board serviced. checking hardware test. Data for processor x Download and install the latest level of BIOS code. Microprocessor speed mismatch Install microprocessors with identical speeds. Intel® Server Compute Blade SBXD62 Installation and User's Guide 45