Intermec CN50 CN50 Mobile Computer for Windows Mobile 6.1 User's Manual - Page 18

Chapter 1 - Using the CN50 Note: If the CN50 is not using external power and you remove the battery pack, the CN50 goes into a power off state. Contact your Intermec representative for replacement batteries. Charging the Battery Make sure you fully charge the AB24 or AB25 battery before you use your CN50. You can charge the battery before or after you install it in the CN50. A fully discharged battery charges in approximately 4 (AB24) to 6 (AB25) hours. Use the next table to understand how long it takes to charge your batteries in each of the CN50 charger or dock accessories. Charging Times for CN50 Batteries CN50 Charging Accessory AB24 Charging Time AB25 Charging Time AD27 single dock charger AC21 quad battery charger AD23 charge-only multidock AD24 Ethernet multidock AE36 vehicle power adapter 4 hours 4 hours 4 hours 4 hours 4 hours 6 hours 6 hours 6 hours 6 hours 6 hours AE37 AC adapter 4 hours 6 hours The battery is fully charged when the battery status LED shows a steady green. For information on these accessories, see "Accessories" on page 91. To charge the battery: • Insert the battery into a quad battery charger, a single dock, or a multidock, or attach external power to the CN50 with the battery installed. Changing the Battery The CN50 resets when you remove the battery. To change the battery: 1 Save your files and close any open applications. 4 CN50 Mobile Computer for Windows Mobile 6.1 User's Manual