Intermec CN50 CN50 Mobile Computer for Windows Mobile 6.1 User's Manual - Page 58
Configuring WPA or WPA2 with Funk Security, Configuring 802.1x Security With Funk Security
View all Intermec CN50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Chapter 2 - Connecting and Configuring the CN50 Configuring WPA or WPA2 with Funk Security Use the following procedure to configure WPA or WPA2 with Funk security. 1 Make sure the communications and radio parameters on your CN50 are configured. 2 Make sure Funk is selected as your security choice. 3 Start Intermec Settings. 4 Choose Communications > 802.11 Radio > Funk Security. 5 Select the profile you want to configure. 6 For Association, choose WPA or WPA2. 7 For 8021x, choose None. 8 For Pre-Shared Key, enter the pre-shared key or passphrase. The pre-shared key must be a value of 32 hex pairs preceded by 0x for a total of 66 characters. The value must match the key value on the access point. The passphrase must be from 8 to 63 characters. After you enter a passphrase, the CN50 internally converts it to a pre-shared key. This value must match the passphrase on the authenticator. 9 Save your settings. Configuring 802.1x Security With Funk Security Use the following procedure to configure 802.1x security with Funk security. 1 Make sure the communications and radio parameters on your CN50 are configured. 2 Make sure Funk is selected as your security choice. 3 Start Intermec Settings. 4 Choose Communications > 802.11 Radio > Funk Security. 5 Select the profile you want to configure. 6 For Association, choose Open. 7 For Encryption, choose WEP. 44 CN50 Mobile Computer for Windows Mobile 6.1 User's Manual