Intermec CN50 CN50 Mobile Computer for Windows Mobile 6.1 User's Manual - Page 65
Enabling WPA-PSK with Microsoft Security, Configuring 802.1x Security with Microsoft Security
View all Intermec CN50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Chapter 2 - Connecting and Configuring the CN50 Enabling WPA-PSK with Microsoft Security Use the following procedure to enable WPA-PSK with Microsoft security. 1 Make sure the communications and radio parameters on your CN50 are configured. 2 Start Intermec Settings. 3 Choose Communications > 802.11 Radio > Microsoft Security. 4 For Infrastructure Mode, choose Infrastructure. 5 For Network Authentication, choose WPA-PSK. Data Encryption automatically defaults to TKIP. 6 For Pre-Shared Key, enter the pre-shared key or the passphrase. The pre-shared key must be a value of 32 hex pairs preceded by 0x for a total of 66 characters. The value must match the key value on the authenticator. The passphrase must be from 8 to 63 characters. After you enter a passphrase, the CN50 internally converts it to a pre-shared key. This value must match the passphrase on the authenticator. 7 Save your settings. Configuring 802.1x Security with Microsoft Security Use the following procedure to configure 802.1x security with Microsoft. 1 Make sure the communications and radio parameters on your CN50 are configured. 2 Start Intermec Settings. 3 Choose Communications > 802.11 Radio > Microsoft Security. 4 For Infrastructure Mode, choose Infrastructure. 5 For Network Authentication, choose Open. 6 For Data Encryption, choose WEP. 7 For 802.1X Authentication, choose TLS or PEAP. CN50 Mobile Computer for Windows Mobile 6.1 User's Manual 51