Intermec CN50 CN50 Mobile Computer for Windows Mobile 6.1 User's Manual - Page 42

Chapter 2 - Connecting and Configuring the CN50 Configuring the CN50 You can configure many parameters on the CN50 such as the bar code symbologies it decodes or the network settings. These characteristics are controlled by configuration parameters. The values you set for these configuration parameters determine how the CN50 operates. There are several ways to configure the CN50: • Directly on the CN50 using Intermec Settings. This allows you to change only the settings on that computer. For more information, see "Using Intermec Settings Directly On the CN50" on page 29. • You can use the ScanNGo utility, which is part of SmartSystems™ Foundation, to quickly provide the CN50 with the minimal information necessary to connect to a secure network. For more information, see the next section "Managing the CN50 With SmartSystems Foundation." • You can use a third party device management product that supports the CN50, such as the Microsoft System Center Mobile Device Manager. For more information, visit the Microsoft website at http://msdn.microsoft.com/en-us/default.aspx. • You can use Imager Configuration Bar codes to enable or disable symbologies, reset to factory defaults, and set predefined imager modes. For more information, see "Imager Configuration Bar Codes" on page 105. Managing the CN50 With SmartSystems Foundation SmartSystems Foundation is a software platform that lets you manage all of your SmartSystems-enabled devices, including the CN50, simultaneously from a central server. The SmartSystems console displays all SmartSystems-enabled computers and peripherals in your network. Through the Console, you can: • drag-and-drop configuration bundles, operating system updates, and firmware upgrades to multiple computers. • create a "golden" device configuration to use when updating other computers. 28 CN50 Mobile Computer for Windows Mobile 6.1 User's Manual