Intermec CN50 CN50 Mobile Computer for Windows Mobile 6.1 User's Manual - Page 61
Selecting Microsoft Security, Configuring WPA Security With Microsoft Security
View all Intermec CN50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Chapter 2 - Connecting and Configuring the CN50 With Microsoft as your security choice, you can configure: • WPA • 802.1x • Static WEP Selecting Microsoft Security Use the following procedure to select Microsoft security. 1 Start Intermec Settings. For help, see "Configuring the CN50" on page 28. 2 Choose Communications > 802.11 Radio > Security Choice. 3 From the Security Choice list, select Microsoft Security. An alert box appears telling you that you must save your settings and warm boot the CN50 for the new security choice to take effect. 4 Choose Yes. The CN50 resets and starts with Microsoft Security as the Security Choice. Configuring WPA Security With Microsoft Security Use these procedures to set WPA-802.1x and WPA-PSK security on your CN50 with Microsoft security 1 Make sure the communications and radio parameters on your CN50 are configured. 2 Start Intermec Settings. 3 Choose Communications > 802.11 Radio > Microsoft Security. 4 For Infrastructure Mode, choose Infrastructure. 5 For Network Authentication, choose WPA. Data Encryption automatically defaults to TKIP. 6 For 802.1x Authentication, choose either MD5, TLS, or PEAP. 7 If you choose TLS: a Choose Properties > Run App. The Auth. Settings dialog box appears. b Choose Select. CN50 Mobile Computer for Windows Mobile 6.1 User's Manual 47