Invacare CRFTI Owners Manual - Page 29

Arms Adjusting Swingaway Padded Armrest Height NOTE: For this procedure, refer to FIGURE 2. 1. Remove the half arm from the arm socket. 2. Remove the mounting bolt, two washers and locknut mounted in the arm socket that determine the swingaway padded armrest height. 3. Reposition mounting bolt and one washer to one of three positions in the arm socket depending on the desired height. 4. Retighten the mounting bolt and washer to the arm socket with the remaining washer and locknut. 5. Reinstall the half arm into the arm socket. 6. Repeat STEPS 1‐5 for the opposite side, if necessary. Swingaway Padded Armrest Arm Socket Washer Locknut Three Mounting Positions Washer Mounting Bolt FIGURE 2 Adjusting Swingaway Padded Armrest Height Part No 1134872 29 Crossfire™Series Wheelchairs