Invacare CRFTI Owners Manual - Page 49
Removing/Installing/ the Camber Tube
View all Invacare CRFTI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Removing/Installing/ the Camber Tube SECTION 8-WHEELS ƽ WARNING Camber tube mounting clamps - Make sure the mounting screws are securely tightened before using the wheelchair, otherwise personal injury or damage to the wheelchair may occur. NOTE: For this procedure, refer to FIGURE 8.11. NOTE: When replacing or changing the camber tube, perform with the new camber tube. Removing the Camber Tube 1. Remove the rear wheels. Refer to Removing/Installing Rear Wheels on page 40. 2. Loosen the two socket screws securing camber tube to the two camber tube mounting brackets. 3. Slide the camber tube from the camber tube mounting brackets. Installing the Camber Tube 1. Insert the camber tube into the camber tube mounting brackets. 2. Center the camber tube in the camber tube mounting brackets. 3. Loosen the two socket screws securing camber tube to the two camber tube mounting brackets. 4. Adjust the camber tube. Refer to Adjusting the Camber Tube on page 50. Socket Screw Socket Screw camber Tube camber Tube Mounting Bracket FIGURE 8.11 Adjusting Wheelbase Length (Adjusting Center of Gravity) Part No 1134872 49 Crossfire™Series Wheelchairs