Invacare CRFTI Owners Manual - Page 46
Repositioning the Camber Tube Mounting Brackets, CAUTION
View all Invacare CRFTI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
SECTION 8-WHEELS Repositioning the Camber Tube Mounting Brackets NOTE: For this procedure, refer to FIGURE 8.7. 1. Remove the rear wheels. Refer to Removing/Installing Rear Wheels on page 40. 2. Loosen but do not remove the four socket screws and washers that secure the two camber tube mounting brackets to the camber tube supports. 3. Slide the camber bar forward or backward to adjust the wheelbase length to the desired position. 4. Securely tighten the four socket screws and washers that secure the two camber tube mounting brackets to the camber tube supports. 5. Install the rear wheels. Refer to Removing/Installing Rear Wheels on page 40. Camber Tube Support Camber Tube Mounting Bracket Socket Screws and Washers Camber Tube Mounting Bracket Washers Socket Screws Camber Tube Support Camber Tube FIGURE 8.7 Repositioning the Camber Tube Mounting Brackets Repositioning the Camber Tube Mounting Bracket Socket Screws CAUTION When reinstalling the two socket screws, ensure one empty mounting position remains between the two socket screws. NOTE: For this procedure, refer to FIGURE 8.8 on page 47. 1. Remove the rear wheels. Refer to Removing/Installing Rear Wheels on page 40. 2. Refer to Socket Screw Mounting Positions in FIGURE 8.6 to determine which socket screw(s) must be moved and to which mounting positions. 3. Remove the four socket screws, washers, and lock washers from both camber tube mounting brackets. Crossfire™Series Wheelchairs 46 Part No 1134872