Invacare CRFTI Owners Manual - Page 47

SECTION 8-WHEELS 4. Align the desires mounting positions of the camber tube mounting brackets with the opening of the camber tube supports. 5. Install the four socket screws, washers, and lock washers into the desired mounting positions of both camber tube mounting brackets. Hand tighten. 6. Slide the camber bar forward or backward to adjust the wheelbase length to the desired position. Securely tighten the four socket screws. 7. Install the rear wheels. Refer to Removing/Installing Rear Wheels on page 40. Camber Tube Support Washers Socket Screws Camber Tube Mounting Bracket Camber Tube FIGURE 8.8 Repositioning the Camber Tube Mounting Bracket Socket Screws Reversing the Camber Tube Mounting Bracket Direction NOTE: For this procedure, refer to FIGURE 8.9 on page 48. 1. Remove the rear wheels 2. Remove the four socket screws, washers, and locking washers that secure the two camber tube mounting bracket to the camber tube supports. 3. Rotate the camber tube so that the camber tube mounting bracket faces the opposite direction. 4. Align the desires mounting positions of the camber tube mounting brackets with the opening of the camber tube supports. 5. Install the four socket screws, washers, and lock washers into the desired mounting positions of both camber tube mounting brackets. Hand tighten. 6. Slide the camber bar forward or backward to adjust the wheelbase length to the desired position. Securely tighten the four socket screws. Part No 1134872 47 Crossfire™Series Wheelchairs