Invacare TDXSP Owners Manual 3 - Page 39

° Taper, Raising/Lowering Elevating Front Riggings

Get Invacare TDXSP PDF manuals and user guides View all Invacare TDXSP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

70° Taper 1. Turn the footrest to the side (open footplate is perpendicular to wheelchair). 2. Insert footrest mounting pin into mounting tube. 3. Push the footrest towards the inside of the wheelchair until it locks into place.  The footplate will be on the inside of the wheelchair when locked in place. 4. Repeat STEPS 1- 3 for the other footrest assembly. 5. To remove the footrest, push the footrest release lever inward, rotate footrest outward. 6. Adjust footrest height, if desired. Refer to Footrest Height Adjustment on page 51. 5.5 Raising/Lowering Elevating Front Riggings 1. Perform one of the following: • Raising - Pull back on the release lever and raise front rigging to the desired height. • Lowering - Support front rigging with one hand away from the release lever. Push release lever downward with other hand. 5 USAGE Footrest Mounting Pin Mounting Tube Footplate Footrest Release Lever FIGURE 5 Installing/Removing Footrests - 70° Taper Release Lever Part No 1143192 FIGURE 6 Raising/Lowering Elevating Front Riggings 39 Invacare® Adjustable ASBA Seats

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
5
USAGE
Part No 1143192
39
Invacare® Adjustable ASBA Seats
70° Taper
1.
Turn the footrest to the side (open footplate is perpendicular to
wheelchair).
2.
Insert footrest mounting pin into mounting tube.
3.
Push the footrest towards the inside of the wheelchair until it locks
into place.
4.
Repeat STEPS 1- 3 for the other footrest assembly.
5.
To remove the footrest, push the footrest release lever inward,
rotate footrest outward.
6.
Adjust footrest height, if desired. Refer to Footrest Height
Adjustment
on page 51.
FIGURE 5
Installing/Removing Footrests - 70° Taper
5.5
Raising/Lowering Elevating Front Riggings
1.
Perform one of the following:
•
Raising - Pull back on the release lever and raise front rigging
to the desired height.
•
Lowering - Support front rigging with one hand away from the
release lever. Push release lever downward with other hand.
FIGURE 6
Raising/Lowering Elevating Front Riggings
The footplate will be on the inside of the
wheelchair when locked in place.
Footrest Mounting
Pin
Footrest
Release
Lever
Footplate
Mounting Tube
Release
Lever