Invacare TDXSP Owners Manual 3 - Page 65

Six Month Inspection

Page 65 highlights

7 SETUP/MAINTENANCE The following are recommended items to inspect during regular service inspections performed by a qualified technician. Actual items to be inspected during the service inspection may vary according to the specific wheelchair: Six Month Inspection  Clean upholstery and armrests.  Check that all labels are present and legible. Replace if necessary.  Ensure clothing guards are secure.  Ensure adjustable height arms operate and lock securely.  Ensure upholstery does not have any rips or tears.  Ensure armrest pad sits flush against arm tube.  Ensure arms are secure but easy to release and adjustment levers engage properly.  Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged. Replace if necessary.  Check center mount front riggings for loose fasteners. Replace /tighten if necessary.  Check that cables are routed and secured properly to ensure that cables DO NOT become entangled and damaged during normal operation of seating system.  Ensure proper operation of powered functions (seating, legrests, etc...).  Inspect electrical components for signs of corrosion. Replace if corroded or damaged.  Inspect all fasteners.  Inspect TRRO/TRBKTS fasteners and hardware.  Inspect foam handgrips for damage. If damaged, have them replaced by a qualified technician.  Check power center mount front riggings for worn/frayed straps and/or loose fasteners. If found, replace these items.  Powered Seating Systems - Make sure all electrical connections are secure.  Powered Seating Systems - Make sure drive lock-out operates properly.  Check limit switch position. Part No 1143192 65 Invacare® Adjustable ASBA Seats

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

7
SETUP/MAINTENANCE
Part No 1143192
65
Invacare® Adjustable ASBA Seats
The following are recommended items to inspect during regular service inspections performed by a qualified technician. Actual items to be inspected
during the service inspection may vary according to the specific wheelchair:
Six Month Inspection
Clean upholstery and armrests.
Check that all labels are present and legible. Replace if necessary.
Ensure clothing guards are secure.
Ensure adjustable height arms operate and lock securely.
Ensure upholstery does not have any rips or tears.
Ensure armrest pad sits flush against arm tube.
Ensure arms are secure but easy to release and adjustment levers engage properly.
Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged.
Replace if necessary.
Check center mount front riggings for loose fasteners. Replace /tighten if necessary.
Check that cables are routed and secured properly to ensure that cables DO NOT become entangled and damaged during normal operation of
seating system.
Ensure proper operation of powered functions (seating, legrests, etc...).
Inspect electrical components for signs of corrosion. Replace if corroded or damaged.
Inspect all fasteners.
Inspect TRRO/TRBKTS fasteners and hardware.
Inspect foam handgrips for damage. If damaged, have them replaced by a qualified technician.
Check power center mount front riggings for worn/frayed straps and/or loose fasteners. If found, replace these items.
Powered Seating Systems - Make sure all electrical connections are secure.
Powered Seating Systems - Make sure drive lock-out operates properly.
Check limit switch position.