Invacare TDXSP2V Owners Manual - Page 24

Footplates and Front Rigging, Storage

Get Invacare TDXSP2V PDF manuals and user guides View all Invacare TDXSP2V manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

Invacare® TDX® SP2 Series WARNING! Risk of Injury Pinch points can cause injury. - Be aware that a pinch point A exists between the head tube cap and walking beam. - Be aware that a pinch point B exists between the walking beam/head tube cap and telescoping tube when the wheelchair is at the lowest seat to floor height. - Be aware that a pinch point C may occur when rotating the center mount front rigging assembly. Fig. 2-12 Pinch Points - Head Tube Cap/Walking Beam and Telescoping Tube Fig. 2-13 Pinch Points - Center Mount Front Rigging 2.6 Footplates and Front Rigging WARNING! Risk of Serious Injury or Damage Operating the wheelchair with a clearance of less than 75 mm (3 inches) between the footplates and the ground/floor may cause serious injury or property damage. - ALWAYS maintain a minimum of 75 mm (3 inches) between the bottom of the footplates and ground/floor to ensure proper clearance while the wheelchair is in motion. If necessary, adjust the footplates height to achieve proper clearance. After footplates height adjustment, if the wheelchair dips forward and the footplates touch the ground while in motion, please contact your provider for an inspection and avoid use of the wheelchair if possible. 2.7 Storage WARNING! Risk of Injury, Damage or Death Storage or use near heat sources and combustible products may result in injury or damage. - DO NOT store or use wheelchair near open flames or other heat sources. - DO NOT store or use wheelchair near combustible products. 24 60101877-B

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
Invacare® TDX® SP2 Series
WARNING!
Risk of Injury
Pinch points can cause injury.
– Be aware that a pinch point
A
exists between
the head tube cap and walking beam.
– Be aware that a pinch point
B
exists
between the walking beam/head tube cap and
telescoping tube when the wheelchair is at the
lowest seat to floor height.
– Be aware that a pinch point
C
may occur
when rotating the center mount front rigging
assembly.
Fig. 2-12 Pinch Points — Head
Tube Cap/Walking Beam and
Telescoping Tube
Fig. 2-13 Pinch Points — Center
Mount Front Rigging
2.6
Footplates and Front Rigging
WARNING!
Risk of Serious Injury or Damage
Operating the wheelchair with a clearance of less
than 75 mm (3 inches) between the footplates
and the ground/floor may cause serious injury or
property damage.
– ALWAYS maintain a minimum of 75 mm (3
inches) between the bottom of the footplates
and ground/floor to ensure proper clearance
while the wheelchair is in motion. If necessary,
adjust the footplates height to achieve proper
clearance. After footplates height adjustment, if
the wheelchair dips forward and the footplates
touch the ground while in motion, please
contact your provider for an inspection and
avoid use of the wheelchair if possible.
2.7
Storage
WARNING!
Risk of Injury, Damage or Death
Storage or use near heat sources and combustible
products may result in injury or damage.
– DO NOT store or use wheelchair near open
flames or other heat sources.
– DO NOT store or use wheelchair near
combustible products.
24
60101877-B