Home » Invacare Manuals » Wheelchairs » Invacare TDXSP2V » Manual Viewer

Invacare TDXSP2V Owners Manual - Page 67

DANGER, Risk of Injury, Damage or Death, WARNING, Risk of Serious Injury or Damage, Six Month

Add to My Manuals
Save this manual to your list of manuals

Page 67 highlights

DANGER! Risk of Injury, Damage or Death Overinflation of tires may cause tires to explode. - Inflate tire to the proper tire pressure (P.S.I. / kilopascals) listed on the side wall of the tire. - Only use wheelchair with tires at proper pressure. - The wheels and tires should be checked periodically for cracks and wear and should be replaced if necessary. WARNING! Risk of Serious Injury or Damage Hardware that is loosely secured could cause loss of stability resulting in serious injury or damage. - After ANY adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely. The following are recommended items to inspect during regular service inspections performed by a qualified technician. Actual items to be inspected during the service inspection may vary according to the specific wheelchair: 60101877-B 9.3.1 Six Month Inspection Maintenance DANGER! Risk of Death, Serious Injury, or Damage Failure to complete the inspection of the critical components listed below could result in death or serious injury. - Inspect stability control components which could include anti-dive spring, anti-dive cylinder, ratcheting gears, or end stops to ensure proper operation. - Inspect drive axle nut, locking tab, wheel fasteners or quick release to ensure drive wheel is secure q Inspect stability lock cylinders, front and rear swing arms to ensure proper operation. q Ensure adjustable height arms operate and lock securely. q Ensure arms are secure but easy to release and adjustment levers engage properly. q Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged. Replace if necessary. q Ensure axle nut or bolt and wheel mounting nuts are secure on drive wheels. q Inspect tires for flat spots and wear. q Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop. q Ensure all caster/wheel/fork/headtube fasteners are secure and not damaged/missing. q Check center mount front riggings for loose fasteners. Replace /tighten if necessary. 67

Section	Page
User manual	4
1 General	5
1.1 Introduction	5
1.2 Symbols	5
1.3 Prescription Statement	6
1.4 Intended Use	6
1.5 Indication for Use	6
1.6 Regulations	6
1.7 Service Life	6
2 Safety	7
2.1 General Guidelines	7
2.1.1 Set Up	10
2.1.2 Stairways and Escalators	12
2.1.3 Repair and Service Information — Providers and/or Qualified Technicians	13
2.2 Safety and Handling	14
2.3 A Note to Wheelchair Attendants	17
2.4 Stability and Balance	17
2.4.1 Driving Surfaces	19
2.4.2 Safety Information When Approaching Obstacles	19
2.4.3 The Correct Way to Approach Obstacles	20
2.4.4 Negotiating Inclines	21
2.4.5 Reaching, Leaning and Bending - Forward	22
2.4.6 Reaching, Leaning and Bending - Backward	22
2.4.7 Transferring To and From Other Seats	23
2.5 Pinch Points	23
2.6 Footplates and Front Rigging	24
2.7 Storage	24
2.8 Electrical	25
2.9 Recycling Batteries	25
2.10 Weight Training and Other Activities	26
3 Electromagnetic Compatibility (EMC) Information	27
3.1 Electromagnetic Interference (EMI) From Radio Frequency Sources	27
3.2 Powered Wheelchair Electromagnetic Interference (EMI)	27
3.3 Powered Wheelchair Electromagnetic Emissions	29
4 Components	30
4.1 Component Overview	30
4.2 Remotes	30
4.3 The Powered Seating System	30
4.4 Labels on the Product	31
5 Setup	39
5.1 Setup/Delivery Inspection	39
6 Usage	40
6.1 Pushing the Mobility Device in Freewheel Mode	40
6.1.1 Disengaging/Engaging the Motor Lock Levers	40
6.2 Disengaging/Engaging the Wheel locks	41
6.2.1 Engaging	41
6.2.2 Disengaging	41
7 Controls System	42
7.1 Controls Protection System	42
7.2 Batteries	42
7.2.1 General Information on Charging	42
7.2.2 General Instructions on Charging	42
7.2.3 How to Charge the Batteries	43
7.2.4 How to Disconnect the Mobility Device After Charging	45
7.2.5 Storage and Maintenance	45
7.2.6 Using the Proper Batteries	45
7.2.7 Instructions on Using the Batteries	47
7.2.8 Transporting Batteries	48
7.2.9 General Instructions on Handling the Batteries	48
7.2.10 How to Handle Damaged Batteries Correctly	48
7.2.11 General Information on Battery Installation	49
7.2.12 Removing the Batteries from the Wheelchair	50
7.2.13 Installing Batteries into the Wheelchair	51
7.2.14 Replacing Batteries and/or Battery Cables	53
7.2.15 Cleaning Battery Terminals	55
8 Transport	56
8.1 About Transport Ready Packages	56
8.2 Wheelchair Transport Brackets (TRBKTS)	57
8.3 Transport Ready Option (TRRO)	57
8.4 Compliance Information	58
8.5 Positioning the Wheelchair in the Vehicle	59
8.6 Securement Points	60
8.7 Securing the Wheelchair	60
8.8 Securing the Occupant	61
8.8.1 Wheelchair-Anchored Belts	61
8.8.2 Vehicle-Anchored Belts	62
8.8.3 Seating System	62
8.8.4 Positioning Belts	62
9 Maintenance	65
9.1 Wear and Tear Information	65
9.2 User/Attendant Inspection Checklists	65
9.2.1 Inspect/Adjust Weekly	66
9.2.2 Inspect/Adjust Monthly	66
9.2.3 Inspect/Adjust Periodically	66
9.3 Service Inspection	66
9.3.1 Six Month Inspection	67
9.3.2 Replace Every 18 Months	68
9.3.3 Replace Every 2 Years	68
9.4 Cleaning	68
9.5 Stability Lock	69
9.6 Removing/Installing the Shrouds	70
9.6.1 Removing/Installing the Rear Shroud	70
9.6.2 Removing/Installing the Front Shroud	70
9.7 Wheels and Tires	71
10 After Use	72
10.1 Reuse	72
10.2 Disposal	72
11 Troubleshooting	73
11.1 Driving Performance	73
11.2 Control System	73
11.2.1 Battery and Charger Tips	74
12 Technical Data	76
12.1 Technical Specifications	76
12.2 RESNA WC-1, Section 15 Annex A	80
13 Warranty	84
13.1 Limited Warranty—US	84
13.2 Repair or Replacement	84
13.3 Limitations and Exclusions	84

Match case Limit results 1 per page

Maintenance

DANGER!

Risk of Injury, Damage or Death

Overinﬂation of tires may cause tires to explode.

– Inﬂate tire to the proper tire pressure (P.S.I. /

kilopascals) listed on the side wall of the tire.

– Only use wheelchair with tires at proper

pressure.

– The wheels and tires should be checked

periodically for cracks and wear and should be

replaced if necessary.

WARNING!

Risk of Serious Injury or Damage

Hardware that is loosely secured could cause loss

of stability resulting in serious injury or damage.

– After ANY adjustments, repair or service

and before use, make sure that all attaching

hardware is tightened securely.

The following are recommended items to inspect during

regular service inspections performed by a qualiﬁed

technician. Actual items to be inspected during the service

inspection may vary according to the speciﬁc wheelchair:

9.3.1

Six Month Inspection

DANGER!

Risk of Death, Serious Injury, or Damage

Failure to complete the inspection of the critical

components listed below could result in death or

serious injury.

– Inspect stability control components which

could include anti-dive spring, anti-dive cylinder,

ratcheting gears, or end stops to ensure proper

operation.

– Inspect drive axle nut, locking tab, wheel

fasteners or quick release to ensure drive

wheel is secure

Inspect stability lock cylinders, front and rear swing

arms to ensure proper operation.

Ensure adjustable height arms operate and lock securely.

Ensure arms are secure but easy to release and

adjustment levers engage properly.

Inspect seat positioning strap for any signs of wear.

Ensure buckle latches. Verify hardware that attaches

strap to frame is secure and undamaged. Replace if

necessary.

Ensure axle nut or bolt and wheel mounting nuts are

secure on drive wheels.

Inspect tires for ﬂat spots and wear.

Loosen/tighten caster locknut if wheel wobbles

noticeably or binds to a stop.

Ensure all caster/wheel/fork/headtube fasteners are

secure and not damaged/missing.

Check center mount front riggings for loose fasteners.

Replace /tighten if necessary.

60101877-B