Invacare TDXSP2V Owners Manual - Page 69
Stability Lock
![]() |
View all Invacare TDXSP2V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
CAUTION! Risk of Damage Exposure to liquids may damage components or accessories of wheelchair and electronics. - DO NOT spray with any type of water or liquid. - Electrical components damaged by corrosion MUST be replaced immediately. WARNING! Risk of Injury, Damage or Death Excessive moisture or cleaning may reduce the flame retardancy of the upholstery and may result in injury, damage or death. - Follow all cleaning instructions. - Avoid excessive moisture or cleaning. Regular cleaning will reveal loose or worn parts and enhance the smooth operation of your wheelchair. To operate properly and safely, your wheelchair must be cared for just like any other vehicle. For upholstery that is severely stained or surface finish that is badly damaged, contact Invacare for further information. Maintenance 1. Use the following instructions to clean this product unless otherwise specified. • Upholstery - Warm water and mild non-abrasive soap. • Metal - Hot water and mild non-abrasive soap. Car polish and soft wax may be used to remove abrasions and restore gloss. • Plastic - Hot water and mild non-abrasive soap. 2. Dry the surface with dry cloth. 3. DO NOT use solvents or kitchen cleaners. 9.5 Stability Lock DANGER! Risk of Death or Serious Injury Not performing periodic maintenance on stability lock could result in death or serious injury. - ALWAYS perform the periodic maintenance to the stability lock listed in the inspection checklist of this manual. Stability Lock uses one-way, gas locking cylinders that engage if the rear casters begin to lift off the ground, preventing the chair from lurching forward. 60101877-B 69
![](/manual_guide/products/invacare-tdxsp2v-owners-manual-bbe3068/69.png)