Invacare TDXSP2V Owners Manual - Page 66

Service Inspection

Get Invacare TDXSP2V PDF manuals and user guides View all Invacare TDXSP2V manuals
Add to My Manuals
Save this manual to your list of manuals

Page 66 highlights

Invacare® TDX® SP2 Series DANGER! Risk of Injury, Damage or Death Overinflation of tires may cause tires to explode. - Inflate tire to the proper tire pressure (P.S.I. / kilopascals) listed on the side wall of the tire. - Only use wheelchair with tires at proper pressure. - The wheels and tires should be checked periodically for cracks and wear and should be replaced if necessary. 9.2.1 Inspect/Adjust Weekly q Ensure that the casters are free of debris. q Inspect tires for flat spots and wear. q Inspect all fasteners. q Inspect TRRO fasteners and hardware. q Ensure proper operation of powered functions (Example: drive, seating and legrests). 9.2.2 Inspect/Adjust Monthly q Clean upholstery and armrests. q Clean dirt and lint from axles. q Clean dirt and lint from bearings. q Ensure that the casters are free of debris. q Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged. Replace if necessary. 9.2.3 Inspect/Adjust Periodically • Ensure wheelchair rolls straight (no excessive drag or pull to one side). 66 • Inspect all operator (user/attendant) adjustable fasteners including the back pan, back cane and angle adjustment fasteners, and the arm support, flip back and height adjustment fasteners. Ensure fasteners are securely tightened. • Inspect TRRO fasteners and hardware. • Ensure clothing guards are secure. • Ensure arms are secure but easy to release and adjustment levers engage properly. • Ensure adjustable height arms operate and lock securely. • Ensure upholstery does not have any rips or tears. • Armrest pad sits flush against arm tube. • Ensure that the casters are free of debris. • Inspect foam handgrips for damage. If damaged, have them replaced by a qualified technician. • Check center mount front riggings for loose fasteners. Replace /tighten if necessary. • Check that all labels are present and legible. Replace if necessary. 9.3 Service Inspection Every six months take your wheelchair to a qualified technician for a thorough inspection and servicing. Service inspections MUST be performed by a qualified technician. 60101877-B

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
Invacare® TDX® SP2 Series
DANGER!
Risk of Injury, Damage or Death
Overinflation of tires may cause tires to explode.
– Inflate tire to the proper tire pressure (P.S.I. /
kilopascals) listed on the side wall of the tire.
– Only use wheelchair with tires at proper
pressure.
– The wheels and tires should be checked
periodically for cracks and wear and should be
replaced if necessary.
9.2.1
Inspect/Adjust Weekly
q
Ensure that the casters are free of debris.
q
Inspect tires for flat spots and wear.
q
Inspect all fasteners.
q
Inspect TRRO fasteners and hardware.
q
Ensure proper operation of powered functions
(Example: drive, seating and legrests).
9.2.2
Inspect/Adjust Monthly
q
Clean upholstery and armrests.
q
Clean dirt and lint from axles.
q
Clean dirt and lint from bearings.
q
Ensure that the casters are free of debris.
q
Inspect seat positioning strap for any signs of wear.
Ensure buckle latches. Verify hardware that attaches
strap to frame is secure and undamaged. Replace if
necessary.
9.2.3
Inspect/Adjust Periodically
•
Ensure wheelchair rolls straight (no excessive drag or
pull to one side).
•
Inspect all operator (user/attendant) adjustable
fasteners including the back pan, back cane and angle
adjustment fasteners, and the arm support, flip back
and height adjustment fasteners. Ensure fasteners are
securely tightened.
•
Inspect TRRO fasteners and hardware.
•
Ensure clothing guards are secure.
•
Ensure arms are secure but easy to release and
adjustment levers engage properly.
•
Ensure adjustable height arms operate and lock securely.
•
Ensure upholstery does not have any rips or tears.
•
Armrest pad sits flush against arm tube.
•
Ensure that the casters are free of debris.
•
Inspect foam handgrips for damage. If damaged, have
them replaced by a qualified technician.
•
Check center mount front riggings for loose fasteners.
Replace /tighten if necessary.
•
Check that all labels are present and legible. Replace
if necessary.
9.3
Service Inspection
Every six months take your wheelchair to a qualified
technician for a thorough inspection and servicing.
Service inspections MUST be performed by a
qualified technician.
66
60101877-B