JVC GD-V4200PZW GD-V4200PZW plasma display 32 page instruction manual (English - Page 15
Adjusting the Picture Quality
View all JVC GD-V4200PZW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
ENGLISH 5 Press 2/3 to adjust the selected item. 6 Press MENU/EXIT (or MENU on the Monitor) twice to exit from the menu operations. To make an adjustment while viewing the adjustment bar After step 3 on page 14, proceed as follows: 1 Press 5/∞ to move the cursor (3) to "sub menu." 2 Press 3 to display the Sub Menu. The Sub Menu for H SIZE appears on the screen. H SIZE + :+01 + + + 3 Press 5/∞ to select the Sub Menu you want to adjust. Each time you press the button, the Sub Menu changes as follows: H SIZE H POSITION V SIZE CLOCK PHASE V POSITION 4 Press 2/3 to adjust the selected item. 5 Repeat steps 3 and 4 to adjust the other items. 6 Press MENU/EXIT (or MENU on the Monitor) three times to exit from the menu operations. To reset the adjustments After step 3 on page 14, proceed as follows: 1 Press 5/∞ to move the cursor (3) to "reset." 2 Press 3. The confirmation screen appears. reset Are you sure? "YES" then press key. "NO" then press MENU key 3 Press 3 again to reset the adjustments. To cancel the reset, press MENU/EXIT (or MENU on the Monitor). Note: • Adjustment values for both horizontal and vertical sizes of the screen are so related that if one is adjusted up to near the maximum value, the attainable value of the other will be decreased. Adjusting the Picture Quality Picture quality can be set for each input mode. 1 Press MENU/EXIT (or MENU on the Monitor) to display the Main Menu. Cursor (3) MAIN MENU SIZE/POSITION ADJ. PICTURE ADJ. FUNCTION SELECT STATUS DISPLAY ENTER: SELECT: EXIT: MENU This item appears only when the "RGB" input is selected. 2 Press 5/∞ to move the cursor (3) to "PICTURE ADJ." 3 Press 3 to display the Picture Adjustment Menu. VIDEO A PICTURE ADJ. CONTRAST BRIGHT CHROMA PHASE SHARPNESS sub menu reset : +01 : 00 : -02 : 00 : 00 ADJUST: SELECT: EXIT: MENU 4 Press 5/∞ to move the cursor (3) to the item you want to adjust. Item Adjustment range CONTRAST -20 to +20 BRIGHT (brightness) -20 to +20 CHROMA* -20 to +20 PHASE** -20 to +20 SHARPNESS -20 to +20 sub menu See "To make an adjustment while viewing the adjustment bar" on the next page. reset See "To reset the adjustments" on the next page. * Adjustment is not possible when RGB input is selected. ** Adjustment is only possible when viewing NTSC signal through the VIDEO A or B terminal. 5 Press 2/3 to make adjustments. 6 Press MENU/EXIT (or MENU on the Monitor) twice to exit from the menu operations. 15