JVC GD-V4200PZW GD-V4200PZW plasma display 32 page instruction manual (English - Page 18

Video Adjustments (Continued) 2 / 3 MENU/EXIT MENU INPUT POWER MENU INPUT POWER 5 / MENU Changing the Aspect Ratio The setting adjusted applies to all inputs. • You can change the aspect ratio by pressing ASPECT. (See page 13.) 1 Press MENU/EXIT (or MENU on the Monitor) to display the Main Menu. Cursor (3) MAIN MENU SIZE/POSITION ADJ. PICTURE ADJ. FUNCTION SELECT STATUS DISPLAY ENTER: SELECT: EXIT: MENU This item appears only when the "RGB" input is selected. 2 Press 5/∞ to move the cursor (3) to "FUNCTION SELECT." 3 Press 3 to display the Function Selection Menu. FUNCTION SELECT COLOR TEMP. ASPECT SIGNAL MODE reset : HIGH* : PANORAMA : AUTO 5 5 DISPLAY ASPECT POWER VIDEO A VIDEO B COMPO. RGB MUTING VOLUME MULTIPLE MONITOR ADJUSTMENT MODE ID SET ID MENU/EXIT RM-C575 REMOTE CONTROL UNIT 2 / 3 5 / ADJUST: SELECT: EXIT: MENU 4 Press 5/∞ to move the cursor (3) to "ASPECT." 5 Press 2/3 to select an aspect ratio you want. Each time you press the button, the aspect ration changes as follows: REGULAR FULL PANORAMIC ZOOM * For detailed information on these aspect ratios, see page 13. 6 Press MENU/EXIT (or MENU on the Monitor) three times to exit from the menu operations. To reset the setting You can only reset the color temperature (see page 16), aspect ratio, and video signal type (see page 19) at the same time. See "Resetting the Function Selection Menu Settings" on the next page. Note: • When one of the following signals is being input, the aspect ratio is fixed and cannot be changed. Aspect ratio is fixed to FULL: When 1080i or 720p signal comes in (through the COMPONENT input terminals) When 480p signal (through the COMPONENT input terminals) and any signal comes in (through the RGB input terminals), you can select only REGULAR and FULL. 18