JVC GD-V4200PZW GD-V4200PZW plasma display 32 page instruction manual (English - Page 20

Other Convenient Functions To set the other convenient functions, use menus. You can use the buttons either on the remote control or on Monitor for menu operations. • Refer also to "Menu Classifications" on pages 26 and 27. MENU INPUT POWER MENU INPUT POWER 2 / 3 5 / MENU Showing On-screen Display The input mode and signal type will be indicated on the screen. • The following procedure can be done by using the buttons on the Monitor. You can also show these information by pressing DISPLAY on the remote control. (See page 12.) 1 Press MENU (or MENU/EXIT on the remote control) to display the Main Menu. Cursor (3) MAIN MENU SIZE/POSITION ADJ. PICTURE ADJ. FUNCTION SELECT STATUS DISPLAY ENTER: SELECT: EXIT: MENU This item appears only when the "RGB" input is selected. 5 5 VOLUME - DISPLAY ASPECT POWER VIDEO A VIDEO B COMPO. RGB MUTING VOLUME MULTIPLE MONITOR ADJUSTMENT MODE ID SET ID MENU/EXIT MENU/EXIT RM-C575 REMOTE CONTROL UNIT 2 / 3 5 / 2 Press 5/∞ to move the cursor (3) to "STATUS DISPLAY." 3 Press 3 to display the current input terminal and received signal type. Ex. When selecting "VIDEO A" input VIDEO A NTSC Input selected Input Video signal type Ex. When selecting "COMPONENT" input COMPONENT 480i Ex. When selecting "RGB" input PC 37.9kHz 60.3Hz* When the signal being input is a preset video mode, an "*" will be shown after the frequency. Note: • If you want to make these information appear automatically when you change the input mode, see "Showing the Onscreen When Changing the Input Mode" on page 22. 20