JVC GD-V4200PZW GD-V4200PZW plasma display 32 page instruction manual (English - Page 19
Setting the Receivable Signal Types, Resetting the Function Selection Menu Settings
![]() |
View all JVC GD-V4200PZW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
ENGLISH Setting the Receivable Signal Types You can set the receivable signal types. Normally, select "AUTO." A common setting will apply to both VIDEO A and B terminals, and a different setting will apply to the COMPONENT terminal. 1 Press MENU/EXIT (or MENU on the Monitor) to display the Main Menu. Cursor (3) MAIN MENU SIZE/POSITION ADJ. PICTURE ADJ. FUNCTION SELECT STATUS DISPLAY ENTER: SELECT: EXIT: MENU This item appears only when the "RGB" input is selected. 2 Press 5/∞ to move the cursor (3) to "FUNCTION SELECT." 3 Press 3 to display the Function Selection Menu. FUNCTION SELECT COLOR TEMP. ASPECT SIGNAL MODE reset : HIGH* : PANORAMA : AUTO ADJUST: SELECT: EXIT: MENU 4 Press 5/∞ to move the cursor (3) to "SIGNAL MODE." 5 Press 2/3 to select the receivable video signal type. Each time you press the button, the receivable video signal type changes as follows: • When VIDEO A or VIDEO B input is selected: AUTO NTSC SECAM PAL • When COMPONENT input is selected: AUTO 480i 576i 1080i 720p 480p Resetting the Function Selection Menu Settings You can reset all the following Function Selection Menu settings at a time. • Colour Temperature (see page 16) • Aspect Ratio (see page 18) • Receivable Signal Types: SIGNAL MODE (see the left column) 1 Press MENU/EXIT (or MENU on the Monitor) to display the Main Menu. Cursor (3) MAIN MENU SIZE/POSITION ADJ. PICTURE ADJ. FUNCTION SELECT STATUS DISPLAY ENTER: SELECT: EXIT: MENU This item appears only when the "RGB" input is selected. 2 Press 5/∞ to move the cursor (3) to "FUNCTION SELECT." 3 Press 3 to display the Function Selection Menu. FUNCTION SELECT COLOR TEMP. ASPECT SIGNAL MODE reset : HIGH* : PANORAMA : AUTO ADJUST: SELECT: EXIT: MENU 4 Press 5/∞ to move the cursor (3) to "reset." 5 Press 3. The confirmation screen appears. reset Are you sure? "YES" then press key. "NO" then press MENU key 6 Press 3 again to reset the adjustments. To cancel the reset, press MENU/EXIT (or MENU on the Monitor). 6 Press MENU/EXIT (or MENU on the Monitor) twice to exit the menu operations. To reset the setting You can only reset the color temperature (see page 16), aspect ratio (see page 18), and video signal type at the same time. See "Resetting the Function Selection Menu Settings" described in the right column. 19
![](/manual_guide/products/jvc-gdv4200pzw-gdv4200pzw-plasma-display-32-instruction-manual-english-version-1136kb-e931368/19.png)