JVC GD-V4200PZW GD-V4200PZW plasma display 32 page instruction manual (English - Page 17
Adjusting the White Balance
![]() |
View all JVC GD-V4200PZW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
ENGLISH 4 Press 5/∞ to move the cursor (3) to "COLOR TEMP." 5 Press 2/3 to make an adjustment. Each time you press the button, the color temperature alternate between "HIGH" and "LOW." HIGH: To make the screen become bluish. LOW: To make the screen become reddish. 6 Press MENU/EXIT (or MENU on the Monitor) twice to exit from the menu operations. To reset the setting You can only reset the color temperature, aspect ratio (see page 18), and video signal type (see page 19) at the same time. See "Resetting the Function Selection Menu Settings" on page 19. Note: • To make a fine adjustment, adjust "WHITE BALANCE" (see below). Adjusting the White Balance G GAIN, B GAIN and R GAIN can be finely adjusted separately for "HIGH" and "LOW" settings of the color temperature. When using plural numbers of the Monitors, this can be useful to have the same color on each screen. 1 On the remote control: Press MENU/EXIT while holding VOLUME - to display the Setup Menu. On the Monitor: Press MENU while holding 2 to display the Setup Menu. Cursor (3) SET-UP MENU POWER SAVE : 1MIN. CONTROL LOCK : ON STATUS DISPLAY : ON SCREEN SAVER : ON WHITE BACK : ON VENTILATION MODE : H WHITE BALANCE all reset HOUR METER x100h : 001 ADJUST: SELECT: EXIT: MENU 2 Press 5/∞ to move the cursor (3) to "WHITE BALANCE." 3 Press 3 to display the White Balance Adjustment Menu. 4 Press 5/∞ to move the cursor (3) to the item you want to adjust. 5 Press 2/3 to adjust the selected item. 6 Repeat steps 4 and 5 to adjust the other items. 7 Press MENU/EXIT (or MENU on the Monitor) twice to exit from the menu operations. Notes: • Adjustable range will vary among the Monitors. • "MAX" may appear soon after you begin adjustment. This is normal but not a malfunction. To make an adjustment while viewing the adjustment bars After step 3 of the above procedure, proceed as follows: 1 Press 5/∞ to move the cursor (3) to "sub menu." 2 Press 3 to display the Sub Menu. The Sub Menu for G GAIN appears on the screen. G GAIN - : 000 + 3 Press 5/∞ to select the Sub Menu you want to adjust. Each time you press the button, the Sub Menu changes as follows: G GAIN B GAIN R GAIN 4 Press 2/3 to adjust the selected item. 5 Repeat steps 3 and 4 to adjust the other items. 6 Press MENU/EXIT (or MENU on the Monitor) three times to exit from the menu operations. To reset the adjustments After step 3 of the above procedure, proceed as follows: 1 Press 5/∞ to move the cursor (3) to "reset." 2 Press 3. The confirmation screen appears. reset Are you sure? "YES" then press key. "NO" then press MENU key 3 Press 3 again to reset the adjustments. To cancel the reset, press MENU/EXIT (or MENU on the Monitor). WHITE BALANCE:HIGH G GAIN B GAIN R GAIN sub menu reset : 000 :+ 001 :- 002 ADJUST: SELECT: EXIT: MENU 17
![](/manual_guide/products/jvc-gdv4200pzw-gdv4200pzw-plasma-display-32-instruction-manual-english-version-1136kb-e931368/17.png)