JVC KW-AVX720 Instructions - Page 20
Fader/Balance, Fader, Balance, Volume Adjust, Subwoofer Level, 06 to +08, High Pass Filter, Through - reset
UPC - 046838036552
View all JVC KW-AVX720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
ENGLISH Menu item Fader/Balance Initial: Underlined Selectable setting/item Fader : Adjust the front and rear speaker output balance. • When using a two-speaker system, set the fader level to "0." ♦ F6 to R6; Initial 0 Balance : Adjust the left and right speaker output balance. ♦ L6 to R6; Initial 0 Press [5/∞/2/3] to adjust. Fader/Balance Reset Fader 0 Balance 0 Back Volume Adjust *1 Adjust and store the auto-adjustment volume level for each source, comparing to the FM volume level. The volume level will automatically increase or decrease when you change the source. • appears if "TUNER/Bluetooth PHONE" is selected as the source. ♦ -12 to +12; Initial 00 Subwoofer Level Adjust the subwoofer output level. ♦ -06 to +08; Initial 00 High Pass Filter ♦ Through ♦ On : Select when the subwoofer is not connected. : Select when the subwoofer is connected. Crossover Select the crossover frequency between the front/rear speakers and the subwoofer. ♦ 80Hz, 120Hz, 150Hz Amplifier Gain *2 You can change the maximum volume level of this unit. ♦ Off : Deactivates the built-in amplifier. ♦ Low : VOL 00 to 30 (Select this if the maximum power of the speakers is less than 50 W.) ♦ High : VOL 00 to 50 *1 For "DISC/USB": You can make the adjustments separately depending on the audio format-Dolby digital, MPEG Audio, and the others. *2 The volume level automatically changes to "VOL 30" if you change to with the volume level set higher than "VOL 30." 20