JVC KW-AVX720 Instructions - Page 53

ENGLISH Sound signals emitted through the rear terminals Through the analog terminals (Speaker out/LINE OUT) 2-channel signal is emitted. When playing multi-channel encoded disc, multi-channel signals are downmixed. • DTS sound cannot be reproduced. Through the DIGITAL OUT terminal Digital signals (Linear PCM, Dolby Digital, MPEG Audio) are emitted. • DTS sound cannot be emitted. • To reproduce the multi-channel sounds such as Dolby Digital and MPEG Audio, connect an amplifier or a decoder compatible with these multi-channel sources to this terminal, and set correctly. ( 16) Output signals Playback disc 48 kHz, 16/20/24 bits Linear PCM 48 kHz, 16 bits stereo Linear PCM* 96 kHz, Linear PCM 48 kHz, 16 bits stereo Linear PCM DVD with Dolby Digital Dolby Digital bitstream 48 kHz, 16 bits stereo Linear PCM with MPEG Audio MPEG bitstream 48 kHz, 16 bits stereo Linear PCM Audio CD, Video CD 44.1 kHz, 16 bits stereo Linear PCM / 48 kHz, 16 bits stereo Linear PCM MPEG with Dolby Digital with MPEG Audio MP3/WMA WAV Dolby Digital bitstream 48 kHz, 16 bits stereo Linear PCM 32/44.1/48 kHz, 16 bits Linear PCM 32/44.1/48 kHz, 16 bits Linear PCM 44.1 kHz, 16 bits Linear PCM * Digital signals may be emitted at 20 or 24 bits (at their original bit rate) through the DIGITAL OUT terminal if the discs are not copy-protected. Display information • Available display information varies among the playback sources. Each time you press DISP, the display changes to show the various information. *1 When the source is " iPod," the Artwork of the song is shown if the song has an Artwork data. ( 16) While MP3/WMA file is played, "Jacket picture" is shown if the file has the tag data including "Jacket picture." *2 When is selected for . ( 17) Ex.: When the playback source is a DVD video disc Playback picture screen (only for video sources) Navigation screen*2 SOURCE DVD FLAT CHAP. RPT 3:00 AM Source information screen SOURCE DVD FLAT 3:00 AM Playback picture and source information screen*1 REFERENCES 53