JVC KW-AVX720 Instructions - Page 58
Symptom, Remedy/Cause
UPC - 046838036552
View all JVC KW-AVX720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
ENGLISH USB Symptom Remedy/Cause • Noise is generated. The track played back is not a playable file format. Skip to another file. • Tracks cannot play back as you have Playback order may differ from the one played back using other intended them to play. players. • "Now Reading..." keeps flashing on • Readout time varies depending on the USB device. the screen. • Do not use too many hierarchy and folders. • Turn off the power then on again. • "Cannot play this device Check the No tracks are stored. Copy tracks to the USB device. device" appears on the screen. • Correct characters are not displayed For available characters, 52. (e.g. album name). • While playing a track, sound is sometimes interrupted. The tracks are not properly copied into the USB device. Copy tracks again, and try again. • Bluetooth device does not detect the This unit can be connected with one Bluetooth cellular phone unit. and one Bluetooth audio player at a time. While connected to a device, this unit cannot be detected from another device. Disconnect currently connected device and search again. • The unit does not detect the Bluetooth device. • Check the Bluetooth setting of the device. • Search from the Bluetooth device. • The unit does not make pairing with the Bluetooth device. • Enter the same PIN code for both the unit and target device. If the PIN code of the device is not indicated on its instructions, try "0000" or "1234." • Select the device name from , then try to connect again. ( 28) • Echo or noise occurs. Adjust the microphone unit (supplied with Bluetooth Adapter) position. • Phone sound quality is poor. • Reduce the distance between the unit and the Bluetooth cellular phone. • Move the car to place where you can get a better signal reception. • The sound is interrupted or skipped • Reduce the distance between the unit and the Bluetooth while using a Bluetooth audio player. audio player. • Disconnect the device connected for "Bluetooth PHONE." • Turn off, then turn on the unit. • (When the sound is not yet restored,) connect the player again. • "NEW DEVICE" cannot be selected for Bluetooth audio player is already connected. To select "NEW "Bluetooth AUDIO." DEVICE," disconnect it. ( 27) • The connected audio player cannot Check whether the connected audio player supports AVRCP be controlled. (Audio Video Remote Control Profile). Bluetooth 58