JVC SR-VS10U SR-VS10U dual transport MiniDV/S-VHS VTR 80 page instruction manu - Page 22
Simple, Recording - s vhs to mini dv vcr
View all JVC SR-VS10U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
22 EN SIMPLE PLAYBACK AND RECORDING (cont.) Simple Recording Turn on the TV and select the AV mode. EJECT PLAY STOP CH REC DV NUMBER T 1 4 W 2 5 3 2 6 7 8 9 0 4 DV SP/EP 1 PLAY DV VHS REC ENTER CH VHS PAUSE PAUSE EJECT VHS LOAD A CASSETTE 1 Insert a VHS (or S-VHS) cassette with the record safety tab intact, or a Mini DV cassette with the erase protection switch set to "REC". SELECT DECK 2 Press VHS or DV. The VHS or DV indicator lights. SELECT RECORDING CHANNEL 3 Press CH5∞ (+/-). Or press the appropriate NUMBER keys, then press ENTER. (The channel changes after a few seconds whether you press ENTER or not.) SET TAPE SPEED 4 Press SP/EP (SP/LP for the DV deck) to set the recording speed. 5 START RECORDING Press and hold REC and press PLAY on the remote control, or press REC on the VCR's front panel. Video Calibration takes place at the beginning of both the first SP and the first EP recording after inserting the cassette (when Video Calibration is set to "ON" (VHS deck only) ੬ pg. 34). PAUSE/RESUME RECORDING 6 Press PAUSE. Press PLAY to resume recording. ● During record pause, you can change the recording channel by using the CH5∞ (+/-) buttons or NUMBER keys. Video Calibration will not take place if the tape speed is changed while in record pause mode. STOP RECORDING 7 Press STOP. Then press EJECT on the VHS or DV deck to remove the cassette. STOP 3 NOTES: ● It is not possible to record a TV program on both the VHS deck and the DV deck simultaneously. In addition, it is not possible to record simultaneously from the same external input. ● When you record a tape on the DV deck with the recording speed set to "LP", we recommend that you play that tape back on this deck. Digital video recorder from other manufacturers may not be able to play the tape properly.