JVC SR-VS10U SR-VS10U dual transport MiniDV/S-VHS VTR 80 page instruction manu - Page 53

FADE/WIPE CANCEL T W 1 2 3 2 4 5 6 EFFECT 7 8 9 0 4 1 PLAY DV VHS PAUSE 3 R.A. EDIT IN/OUT EN 53 6 LOCATE EDIT-OUT POINT Press PLAY to start playback. Find the point where you want the edited scene to end, then press PAUSE. Then, press IN/OUT. The edit-out point appears on the screen. P1 IN OUT MODE 1 - - 0 : 3 1 : 0 2→ 0 : 5 4 : 0 0 - - - - 2 3 → 4 → 5 → 6 → 7 → 8 → TC 0 : 0 0 : 1 0 TOTAL 0 : 2 2 : 5 8 7 USE FADE/WIPE EFFECT ON SCENE TRANSITION (IF NECESSARY) Press FADE/WIPE. P1 IN OUT MODE ● Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed. ● If you select a Fade/ 1 WH 0 : 3 1 : 0 2 → 0 : 5 4 : 0 0 P - - 2 P 3 → 4 → 5 → 6 → 7 → 8 → Wipe effect for an Edit- TC 0 : 0 0 : 1 0 TOTAL 0 : 2 2 : 5 8 Out point, the effect is automatically applied to the following Edit-In point. ● You can't use a Picture Wipe/Dissolve at the end of the last scene. ● When you use Fade/Wipe effects, that time is included in the total time (this does not apply to Picture Wipe/Dissolve). 8 USE PLAYBACK EFFECT (IF NECESSARY) Press EFFECT. P1 IN OUT MODE ● Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed. ● You can use Classic 1 WH 0 : 3 1 : 0 2 → 0 : 5 4 : 0 0 P 2 P 3 → 4 → 5 → 6 → 7 → 8 → Film, Monotone, Sepia, TC 0 : 0 0 : 1 0 TOTAL 0 : 2 2 : 5 8 Strobe or Video Echo effects. (੬ pg. 32) ● You can also select - - - - so that the date and time are displayed. 9 REGISTER ADDITIONAL SCENES Repeat steps 5 - 8. ● To change previously registered points, press CANCEL. The registered points disappear, one at a time, from the most recently registered point. ● If you're not using Fade/Wipe or Playback Effects, repeat steps 5 and 6 only.