JVC SR-VS10U SR-VS10U dual transport MiniDV/S-VHS VTR 80 page instruction manu - Page 45
Notes, Attention
View all JVC SR-VS10U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
NUMBER "8"1 T W 2 3 2 4 5 6 NUMBER "7" 7 8 9 0 4 NUMBER "9" TIMER PROG. 1 DV VHS SP/EP 3 OK ATTENTION FOR DBS RECEIVER USERS If you are using a DBS receiver (unless "DBS RECEIVER SET" is set to "OFF" ੬ pg. 19), the BAND indication (TV or CATV or DBS) appears under the channel number display. If the channel number that has been entered requires that the band be set, "7=DBS" is displayed VHS PROGRAM 1 START STOP 8:00AM = 9:00PM DATE CH 12/24/00 110 SP THU DBS PRESS (+/-, SP/EP, 8=DAILY, 9=WEEKLY, 7=DBS), THEN (0K) PRESS (PROG.) TO END on the screen. Press the NUMBER key "7" to select the desired band. a- TV : To timer-record a regular TV program received on the VCR. b- CATV : To timer-record a cable TV program received on the VCR, or through a cable box (unless "CABLE BOX SET" is set to "OFF" ੬ pg.16). c- DBS : To timer-record a satellite program received through a DBS receiver. ● If "BAND" is set to "TV" at the Tuner Set screen (੬ pg.13) and "CABLE BOX SET" is set to "OFF" at the Cable Box Set screen (੬pg. 16), CATV will not be displayed on the Program screen; If "BAND" is set to "CATV" or "CABLE BOX SET" is set to "ON", TV will not be displayed. EN 45 SET TAPE SPEED 8 Press SP/EP (SP/LP for the DV deck) to set the tape speed. RETURN TO NORMAL SCREEN 9 Press PROG. or OK. "PROGRAM COMPLETED" appears on the screen for about 5 seconds, then normal screen appears. 10 ENGAGE TIMER MODE Press TIMER. The VCR turns off automatically and "‰" is displayed on the display panel. ● When "AUTO TIMER" is set to "ON" (੬ pg. 48), press POWER. To Timer-Record Weekly Or Daily Serials anytime during steps 3 through 9, press WEEKLY (NUMBER "9") for weekly serials or DAILY (NUMBER "8") for daily serials (Monday-Friday). Either "WEEKLY" or "DAILY" appears on the screen. Pressing the button again makes the corresponding indication disappear. NOTES: ● To disengage the timer before recording starts, press TIMER again. Pressing once more re-engages it. ● In case of a power failure after programming, the VCR's memory backup keeps your selections for approximately 10 minutes. ● Programs that start after midnight must have the next day's date. ● After timer recording is completed, the VCR's power goes off automatically. ● You can program the timer while a regular recording is in progress; the on-screen menu will not be recorded. ● If the end of tape is reached during timer recording, the cassette is automatically ejected. ● When timer-recording cable or satellite channels through an external tuner, be sure to keep the cable box or satellite receiver's power ON. ATTENTION If there is a conflict in the timer schedule and one program overlaps with another, only the parts shown below in gray will be recorded. Pattern 1: The program with the lower program number will be recorded. 10:00 Program 1 11:00 CH10 12:00 Program 2 CH40 Not recorded Pattern 2: The program that is broadcast earlier will be recorded. 10:00 Program 1 11:00 CH10 Program 2 CH40 12:00 Not recorded Pattern 3: The program that is broadcast earlier will be recorded, followed by the remaining portion of the other program. 10:00 Program 1 11:00 CH10 Program 2 12:00 CH40 Not recorded