JVC SR-VS10U SR-VS10U dual transport MiniDV/S-VHS VTR 80 page instruction manu - Page 62

62 EN Insert Editing Recorder Your VCR EDITING (cont.) VHS Insert Editing Insert editing replaces part of the recorded scene with new material. Both the picture and Hi-Fi audio soundtrack are replaced with new ones, while the normal audio soundtrack remains unchanged. If you wish to change the normal audio track as well, use the audio dubbing function simultaneously. Use your VCR as the recorder. Source tape Audio/Video cable (supplied) Audio/Video signal Player Another VCR NUMBER 1 "04" T W 2 5 3 2 6 7 8 9 0 4 1DV DV VHS CH VHS PAUSE 3 JOG JOG/SHUTTLE SHUTTLE NOTE: Insert Editing is not possible with a Mini DV tape recorded in LP mode. Recorded tape Before insert editing Normal audio track After insert editing Video/Hi-Fi audio track DV Insert Editing (SP Mode Only) The picture is replaced with new one, while the audio soundtrack remains unchanged. Use your VCR as the recorder. MAKE CONNECTIONS 1 Connect the player's VIDEO OUT or S-VIDEO OUT and AUDIO OUT connectors to your VCR's VIDEO IN or S-VIDEO IN and AUDIO IN on the front panel. SELECT RECORDING DECK 2 Press VHS or DV. ● When using the DV deck as the recoding deck, press ← so that the video and audio signals from the VIDEO/S-VIDEO and AUDIO L + R input connectors can be recorded. 3 SET INPUT MODE Press the NUMBER key "0" and CH so that "L-2" appears in place of a channel number. ● Be sure to select the correct FRONT AUX INPUT ("VIDEO" or "S-VIDEO"). (To select the correct AUX INPUT, follow steps 5 - 7 from the "Edit From A Camcorder" section ੬ pg. 57). LOCATE END POINT (VHS DECK ONLY) 4 Load the recording cassette into your VCR, and play it back to determine the edit-out point (the end of the segment to be replaced) using the JOG/SHUTTLE controls or pressing ™£ and PAUSE. ● To use the JOG dial/SHUTTLE ring, first press the JOG/SHUTTLE button on the remote control so that the button lights up.