JVC VN-H157WPU Instruction Manual - Page 111
PTZ Settings, Click here.
View all JVC VN-H157WPU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
PTZ Settings Sets the camera preset position. ● This page can be used during access using "admin" or "operator". ● While the Viewer Setup Menu is open, click [Control] to switch to the Control Menu. ● Click [PTZ Settings] to open the Settings screen. ● To set the position, use the pan, tilt, and zoom operations to set the screen as desired. Next, after selecting the position number and entering the position title, click [Register] to register the position. The Position No. is used for alarm triggers, position movement, auto patrol position settings, and so on. Note: ● You can use the Digital PTZ for frame sizes 640x360 and 640x480 only. Perform Framesize settings on the [Encoding] page. (A Page 27) Ⅵ PTZ Settings Click here. A B C 111
111
PTZ Settings
Sets the camera preset position.
●
This page can be used during access using "admin" or "operator".
●
While the Viewer Setup Menu is open, click [Control] to switch to the Control Menu.
●
Click [PTZ Settings] to open the Settings screen.
●
To set the position, use the pan, tilt, and zoom operations to set the screen as desired. Next, after
selecting the position number and entering the position title, click [Register] to register the position.
The Position No. is used for alarm triggers, position movement, auto patrol position settings, and so
on.
Note:
●
You can use the Digital PTZ for frame sizes 640x360 and 640x480 only.
Perform Framesize settings on the [Encoding] page. (
A
Page 27)
B
A
C
Click here.
±
PTZ Settings