JVC VN-H157WPU Instruction Manual - Page 12
Internet Explorer Setting, Settings, How to Open the Setting
![]() |
View all JVC VN-H157WPU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Internet Explorer Setting Settings How to Open the Setting Page 1. Enter IP address of camera in the address bar of Internet Explorer. (for example, the factory default of "http://192.168.0.2") 2. Enter the user name and password. (The factory default user name is "admin" and the factory default password is "jvc") 3. The Built-in Viewer of the camera is displayed. Click here. Memo: ● When IP address entry, see the "Instructions (IP Address Settings)". ● The [Security Information] screen appears before the top page display. Press the [OK] button to proceed. To suppress this warning screen, correct the Internet Explorer settings as follows. ● Select [Tools] - [Internet Options] - [Security] - [Trusted sites]. ● Then, select [Custom Level] and [Miscellaneous] and set [Display mixed content] to "Enable". Note: ● Do not turn off the power supply or reset the camera when booting or directly after changing settings. Doing so may cause a malfunction of the camera. 4. Click [Details] of the Built-in Viewer. ● [Basic Setting1] page will be opened if accessed by user name "admin". (A Page 13) ● [Basic Setting2] page will be opened if accessed by user name "operator". (A Page 15) ● [Miscellaneous] page will be opened if accessed by user name "user". (A Page 92) 12
![](/manual_guide/products/jvc-vnh157wpu-instruction-manual-a680eb6/12.png)