JVC VN-H157WPU Instruction Manual - Page 56
Privacy Mask continued, Privacy Mask, Set values, Brightness, All Mask, Clear Mask
![]() |
View all JVC VN-H157WPU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Internet Explorer Setting Settings (continued) Privacy Mask Page (continued) Memo: ● Press the [OK] button to enable the new settings. ● When camera images are acquired by the Built-in Viewer or another client and if this acquisition exceeds the distribution capability of camera, the video images may not appear on the [Privacy Mask] page. When you use the [Privacy Mask] page, turn the Built-in Viewer and another client Off. For stopping the Built-in Viewer, see "Exiting the Built-in Viewer". (A Page 123) ● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry will be denied. Press the [Cancel] button to restore the invalid entry to the value before the change was made. If you press the [Cancel] button, other changed items will also be restored to the values before the change was made. ● The privacy mask that you set also works for the monitor output. Note: ● Masks cannot be set in a zoomed screen. ● When you open the Privacy Mask settings page, the camera zoom is released. The size of the mask you have set changes when you zoom. A Mask B Privacy Mask C Brightness D All Mask E Clear Mask The screen is divided into 46 (horizontal) by 34 (vertical) blocks (for aspect ratio 4:3) or into 60 (horizontal) by 34 (vertical) blocks (for aspect ratio 16:9). You can specify the positions to be masked in each block. Turns the Privacy Mask function ON or OFF. [Set values: ON, OFF] Sets a brightness of Privacy Mask areas. When a large value is set, the brightness level increases (becomes white). When a small value is set, the brightness level decreases (becomes dark). This setting is common to all blocks. [Set values: 0 to 4 to 8] Enables all the privacy masks. Press the [OK] button to enable this setting. Releases all the privacy masks. * The [Set values] in bold letters are factory defaults. 56
![](/manual_guide/products/jvc-vnh157wpu-instruction-manual-a680eb6/56.png)