JVC VN-H157WPU Instruction Manual - Page 60
Audio Detection VN-H57U/H257U/H257VPU/H157WPU only
View all JVC VN-H157WPU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Internet Explorer Setting Settings (continued) Audio Detection Page (VN-H57U/H257U/H257VPU/H157WPU only) This page sets the audio detection. This page can be used during access using "admin" or "operator". Peak meter A B C Click [Advanced Settings] and [Audio Detection]. Memo: ● The meter turns green when below the detection level threshold, and turns red when above the detection level threshold. ● Press the [OK] button to enable the new settings. settings (except for the selection for A) ● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry will be denied. Press the [Cancel] button to restore the invalid entry to its previous value. When you press the [Cancel] button, other entries that you changed will also be restored to their previous values. ● After audio has been detected, if the audio level is below the detection level threshold for 5 seconds or more, the camera returns to non-detection status. Note: ● If the audio driver is not installed on your computer, audio detection does not function. ● When [Tampering Detection] or [Motion Detection] is set to "ON", the audio detection function cannot be used. 60