Jabra 6430-17-20-205 User Manual - Page 24

english Attaching a Head- or Neckband To attach a head- or neckband: 1. Remove the current wearing-style attachment, if any. 2. Align the earbud and fitting of the headset with the matching holes on the head- or neckband and press until it clicks into place. 3. Put on the headset and rotate the microphone until it is as close as possible to your mouth. Figure 16: Attaching the Jabra GO headset to a head- or neckband Removing a Wearing-Style Attachment To remove a wearing-style attachment, perform the opposite procedure to that described above for attaching it. 7.3 Replacing the Earbud After extensive use, the earbud of the Jabra GO headset may become worn, dirty and/or uncomfortable. The headset includes two extra, differently-shaped earbuds. Otherwise, you can order additional replacements from GN at any time. To remove the earbud, hold the headset with the earbud facing you and twist the earbud gently anti-clockwise until it comes free. Then align the replacement earbud onto the same fitting and gently press it down until it clicks into place (do not rotate). 7.4 Using the Headset with Other Bluetooth® wireless technology Devices Pairing the Headset with a Mobile Phone The Jabra GO headset is based on Bluetooth® wireless technology and can therefore be used with any mobile phone that also supports Bluetooth® wireless technology. You must set up the wireless communication between the two devices by pairing them. See Section 4.3: Pairing the Headset with your Mobile Phone for complete instructions. Pairing the Headset with a Jabra LINK 350 USB Bluetooth® Adapter To pair the headset to a Jabra LINK 350 USB Bluetooth® Adapter connected to your computer, place both units in pairing mode while they are close to each other. They will find each other automatically and then pair and connect to each other as needed. See Section 9.3: Pairing the Jabra LINK 350 USB Bluetooth® Adapter and Headset for complete details. Managing Your Bluetooth® wireless technology Connections and Pairing Table Once you have paired it with your mobile phone and Jabra LINK 350 USB Bluetooth® Adapter, the headset manages its Bluetooth® wireless technology connections automatically. However, you may sometimes need to manage your Bluetooth® wireless technology connections and pairing table more carefully. See Section 7.12: Managing Bluetooth® wireless technology Connections and the Pairing Table for complete details. Jabra GO 6430 User manual 24