Jabra 6430-17-20-205 User Manual - Page 28

english Choosing Voice or Tones for Target indicators The headset is capable of playing either a tone or a human voice when you change the target phone, thus telling you what the new target is. The human voice is always in English, regardless of your other language settings. By default, the human voice will be played. However, if you do not like hearing the English voice, you can switch to using the tones. To change this setting, use the Jabra Control Center program of the Jabra PC Suite running on your PC. See the online help for complete details. Headset Visual Indicators (LED) The headset includes a multicolor LED, which indicates the state of the headset as outlined in the table below. During charging, the headset shows the charging progress in combination with the table's various visual indicators as follows: -  Less that 10% battery capacity: state LED indication (see table below) is shown interspersed with a constant red light - Between 10% and 100% battery capacity: state LED indication is shown interspersed with a constant yellow light - Fully charged: state LED indication is shown interspersed with a constant green light Headset state Idle (powered on, but not connectable, pairing, ringing, call active or audio link) LED when battery level is good Blue 200ms Off 4800ms Repeats for 60 seconds LED when battery level is low Same as for good battery level Connectable Green 300ms Off 300ms Green 300ms Off 300ms Green 300ms Off 1500ms Repeats for 60 seconds Red 100ms Off 500ms Red 100ms Off 500ms Red 100ms Off 1700ms Repeats indefinitely Call active or audio link open Blue 100ms Off 300ms Blue 100ms Off 2000ms Repeats indefinitely Red 100ms Off 300ms Red 100ms Off 2000ms Repeats indefinitely Ringing Blue 100ms Off 300ms Blue 100ms Off 1000ms Repeats indefinitely Red 100ms Off 300ms Red 100ms Off 1000ms Repeats indefinitely Jabra GO 6430 User manual 28