Jabra 6430-17-20-205 User Manual - Page 33

english 9. The Jabra LINK 350 USB Bluetooth® Adapter The Jabra LINK 350 USB Bluetooth® Adapter and Travel Charger are included with the Jabra GO 6430 package; they are available as accessories for all other Jabra GO solutions. This chapter explains how to use the Jabra LINK 350 USB Bluetooth® Adapter. This chapter explains how to use the Travel Charger. See also Chapter 3: Product Overview for detailed diagrams. 9.1 Jabra LINK 350 USB Bluetooth® Adapter Diagram 1. Activity indicators (LEDs) 2. USB plug 3. Multifunction button 2 3 1 LINK350 Figure 19: Jabra LINK 350 USB Bluetooth® Adapter 9.2 Purpose of the Jabra LINK 350 USB Bluetooth® Adapter The Jabra LINK 350 USB Bluetooth® Adapter connects to your computer and communicates with your headset via Bluetooth® wireless technology. It provides the following features: - Basic Bluetooth® wireless technology connection - Softphone control - Wideband audio - Headset configuration Though it is also possible to pair your Jabra GO headset with any standard Bluetooth® wireless technology device - including Bluetooth® PC cards - this type of pairing provides only the basic connection (the first point listed above) and you may also experience compatibility issues. Softphone-control, wideband audio and headset-configuration features require the Jabra LINK 350 USB Bluetooth® Adapter. 9.3 Pairing the Jabra LINK 350 USB Bluetooth® Adapter and Headset The headset and Jabra LINK 350 USB Bluetooth® Adapter are already paired from the factory. The procedure given below is only necessary if pairing is lost. To pair your Jabra GO headset and USB Bluetooth® Adapter: 1. Attach the USB Bluetooth® Adapter to your PC and turn on the PC (see also the section 4.4: Jabra LINK 350 USB Bluetooth® Adapter Setup and Connections). 2. Put the USB Bluetooth® Adapter in pairing mode by pressing and holding its multifunction button for about 2 seconds - until its blue pairing LED turns on and stays lit. 3. If your headset is currently turned on, turn it off by pressing and holding on its multifunction button for about 4 seconds - until its LED gives three quick red flashes and then turns off. 4. Put your (powered-off ) headset in pairing mode by pressing and holding on its multifunction button for about 4 seconds - until its LED lights a constant blue. Jabra GO 6430 User manual 33