Jensen BT1611I Owners Manual - Page 11

BT1611i

11

TUNER OPERATION

AM/FM Band Selector (BAND)

Press

BAND

(5) during radio play to switch

between three FM bands and two AM bands.

“FM1”, “FM2”, “FM3”, “AM1” or “AM2” will

appear in the display to indicate the band

currently selected.

Tuning

Automatic Tuning

Press the Up Tuning

>>|

(14) button to tune

upward in frequency and the Down Tuning

|<<

(13) button to tune downward in frequency. The

unit will automatically stop at the next strong

station. If the Local mode is active, the radio will

seek the next strong local station when either

button is pressed.

Manual Tuning

Press the Up Tuning (14) or Down Tuning (13)

button for more than two seconds to select

manual tuning mode. “Manual Seek” will appear

in the display. Press the Up or Down Tuning

buttons to move radio frequency up or down

two digits at a time.

Press and hold

the Up or

Down Tuning buttons to quickly advance to a

certain frequency. Release when the desired

frequency is reached. If tuning is not adjusted

within five seconds of entering manual tuning

mode, the radio will revert to automatic tuning

and “AUTO” will appear in the display.

Preset Stations

Up to six stations on each band can be stored

as presets and can then be instantly recalled by

pressing the associated preset button on the

front panel (16) or remote control. To store a

station, turn the radio on and select the desired

band and station.

Press and hold

the desired

preset button (numbered one through six on the

face of the radio or remote control) for more

than two seconds. When stored, the preset

number will appear in the display. The station is

now stored and can be recalled at any time by

pressing the corresponding preset button.

Repeat for the remaining five presets on the

current band and for all presets on the other

four bands.

Automatically Store / Preset

Scan (AS/PS)

Automatically Store

Select six strong stations and store them in the

current band using the Automatic Store feature.

To enable this feature, press and hold

AS/PS

(17) for more than two seconds. The radio will

automatically scan the band in use and enter

strong stations into the preset memory

/

TUNE

BASS

SUB

RECORD

BT1611I MP3/WMA RECEIVER

MENU

AUX IN

17

5

16

15

14

13

2

INT

Jensen BT1611I Owners Manual - Page 11

AM/FM Band Selector BAND, Tuning, Preset Stations, Automatically Store / Preset, Scan AS/PS - remote

Page 11 highlights