Jensen BT1611I Owners Manual - Page 24

Pairing the Bluetooth system with your Mobile Phone and Head Unit 1. Press and hold the D (display) button (9) to access the MENU. is the first option on the menu. 2. Press the AUDIO CONTROL button (4) to initiate the pairing process. Keep the mobile phone within 2 meters of the unit during pairing. 3. Refer to the instructions that came with your mobile phone to activate the Bluetooth function and search for devices. 4. Select "BT60" from the pairing list on the mobile phone. 5. Enter "1234" as the password. • If pairing is successful, the display will show . • If pairing fails, is flashed on the display for 3 seconds, and then the unit will revert to the previous operation automatically. If pairing fails, repeat the above steps. NOTE: During Pairing, only the Power, Volume +/-, B (Clear) and Mute keys are functional. Other keys are disabled during pairing mode. Reconnecting Automatic Re-connection The unit has a built-in Auto Re-connection function. When a paired phone is in range, the head unit will automatically reconnect with the mobile phone when the ignition key is turned on (only if the mobile phone was previously paired with the head unit). The unit will also automatically reconnect when attempting to dial a call through the head unit. Manual Re-connection Under the following conditions, you may need to reconnect manually: • If the mobile phone is out of range (more than 2 meters from the head unit). • If the connection is lost and while talking on the phone (or there is an incoming call) more than 2 meters from the head unit. • When doing an audio transfer from the phone back to the head unit. To manually reconnect with the paired phone, perform the following steps: 1. Press and hold the D (display) button (9) to access the MENU. 2. Press the D button again to select the option. • The LCD displays during the re-connection period. • If the re-connection is successful, the LCD Display displays 24 BT1611i and returns to the previous mode. • If the re-connection fails, the LCD displays and automatically returns to the previous mode. Disconnecting the Phone from the Head Unit To manually disconnect with the paired phone, perform the following steps: 1. Press and hold the D (display) button (9) to access the MENU. 2. Press the D button again to select the option. 3. Turn the AUDIO CONTROL (3) to select . • The LCD displays during the disconnection period. • If the disconnection is successful, the LCD Display displays and returns to the previous mode. Managing Incoming Calls When there is an incoming call, the LCD will display the Caller ID. If the incoming call has no caller ID, the LCD will display "PHONE IN".